Recyclers and soil stabilizers

image

Recycling damaged asphalt pavements and stabilising soils

Cold recyclers are used to prepare asphalt pavement on site. In this process, the existing pavement is granulated with the milling and mixing rotor and prepared by adding precise amounts of bituminous binding agents, cement and water. The result is a homogeneous material that can be used to directly repave the soil. Soil stabilisers use the milling and mixing rotor to mix pre-spread binding agents such as lime or cement into the existing, less stable soil and transform it into a high-quality material directly on site.

Cold recyclers

Cold recyclers in the CR series are used for the cost-effective recycling of pavements. Binding agents and water are added in precisely metered quantities by means of microprocessor-controlled injection systems. Cold recyclers with a paving screed use the down-cut process and immediately repave the recycled construction material. In large projects requiring high daily performances, the recycler transfers the recycled construction material via its integrated discharge conveyor to the material hopper of the downstream paver, which immediately repaves it, achieving a high degree of precompaction. The recyclers in the CR series additionally can be used as high-performance milling machines.

W 240 CRi Cold recyclers
W 240 CRi

Cold recyclers

Working width max. 7 ft 8 in
Working depth
13.8 in
Maximum power 775 kW / 1,038 hp
Operating weight, CE
106,924 lbs
W 380 CRi Cold recyclers
W 380 CRi

Cold recyclers

Working width max. 12 ft 6 in
Working depth
13.8 in
Maximum power 775 kW / 1,038 hp
Operating weight, CE
116,845 lbs

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.