All the latest news at a glance – from the WIRTGEN GROUP and the WIRTGEN, VÖGELE, HAMM, KLEEMANN, and BENNINGHOVEN product brands.
Two Good Design Awards for HAMMcompactors
The two latest compactor series from HAMM were awarded the Good Design Award 2022. The renowned design award has been presented for 75 years and is one of the world's most important awards for ground-breaking design.
With the HP 100i pneumatic-tire roller, HAMM is presenting a new machine that is ideally suited to chipseal. To suit the application, the HP 100i is offered with 13,227 lbs (6 t), 17,637 lbs (8 t) or 22,046 lbs (10 t) operating weights.
For automatic optimisation of the crushing process between crushing plants and to achieve maximum utilisation of the plant train, Kleemann plants are simply linked with one another via intelligent line coupling.
John Deere Is “All In” As It Previews It’s Largest CONEXPO-CON/AGG Presence to Date
John Deere will have its largest presence ever at CONEXPO-CON/AGG 2023 this March in Las Vegas. Totaling 80,000 square feet (7 432,24 m²) of booth space, John Deere and Wirtgen Group are combining forces for the first time.
Innovative machine technology and digital solutions
HAMM is presenting new compactors, tandem rollers, pivot-steered tandem rollers, electrified tandem rollers, pneumatic-tire rollers and trench rollers at Conexpo/CON-AGG 2023. Also new in the range: Digital solutions for compaction documentation and analysis.
New mobile stackers MOBIBELT for optimised logistics
The mobile stackers MOBIBELT are used for efficient logistics processes on work sites. They flexibly extend the action radius of crushing and screening plants and thus make large stockpiles and improved work site logistics possible.
VÖGELE presenting high-performance pavers in all sizes at CONEXPO
At CONEXPO 2023, VÖGELE will be presenting an attractive cross-section of its current product range: From the small paver, the SUPER 700i, the SUPER 1300-3i compact paver and the SUPER 1703-3i 8 ft paver through to the SUPER 2000-3i 10 ft paver, all the machines are designed to deliver productivity, efficiency and precision.
Asphalt production at the first Benninghoven Recycling Priority Plant (RPP) in Switzerland began in September 2022 – but this was not the only première. The new plant not far from Geneva was also the first of its kind in the country to be equipped with hot gas generator technology.
HAMM presents a new generation of pivot-steered tandem rollers: The HX series. It is impressive thanks to intuitive operation with Easy Drive, high performance data, many comfort features and sustainable operation.
The new Wirtgen Generation Z² cutting tools for cold recyclers and soil stabilisers deliver convincing performance in all materials thanks to high impact resistance, high shank breakage resistance and best-possible pick holder protection.
At Bauma 2022, the Wirtgen Group once again confirmed its pioneering role in the industry with 37 world premières and trailblazing solutions for sustainability throughout the entire road construction process chain.
With the HC series, HAMM is launching a new generation of compactors on the market. With operating weights of 11–25 t and a wide range of equipment variants, they can comply with an extremely wide range of requirements.
Road construction companies are equipped for the future with VÖGELE’s latest-generation SUPER 1900-5(i) and SUPER 2100-5(i) Road Pavers and AB 500 and AB 600 Extending Screeds. Highway Class pavers are perfectly at home whether on highways or handling other demanding large-scale projects.
With eight electric rollers in the compact class, HAMM's launch represents a milestone for the compaction industry. The HD 10e and HD 12e models produce zero emissions while performing at the high compaction power associated with the HAMM brand.
Making sustainable road construction tangible: the Wirtgen Group at Bauma
‘The Future in Roadbuilding – Smart. Safe. Sustainable.’ This was the motto of the joint appearance by the Wirtgen Group and John Deere at Bauma 2022. With 97 exhibits – including 37 world premieres – and dedicated exhibition spaces covering digital system concepts and sustainability, the Group showcased trailblazing road construction solutions.
Smart compaction – increase quality while reducing energy consumption
With its smart compaction concept, HAMM combines a range of cutting-edge solutions for measuring, documenting and analysing compaction processes. Alongside its Smart Doc app, HAMM presents a second compaction assistant in the form of Smart Compact.
The sustainable power pack MOBIREX MR 130(i) PRO celebrates its world premiere.
The mobile impact crusher MOBIREX MR 130(i) PRO is the latest representative of the Kleemann PRO line. The powerful plant is used as a primary and secondary crusher in natural stone and recycling and meets high environmental standards. Thanks to the diesel-electric drive E-DRIVE, local emission-free operation is possible.
The intuitive operating concept SPECTIVE includes various components that are ideally tuned to one another and accompany the machine operator during the entire working day. The digital extension SPECTIVE CONNECT is now also available for other Kleemann crushing plants.
BENNINGHOVEN | Sustainability in asphalt production
Working more efficiently with sustainable and economical technologies is the challenge of today and tomorrow. Solutions from Benninghoven lower emissions and secure the future of asphalt mixing plant sites.
Concrete removal by cold milling at Leipzig/Halle Airport
In the course of the refurbishment of Leipzig/Halle Airport by Kutter GmbH & Co. KG, the first phase of the project involved the complete removal of the concrete surface layer of the north runway and associated taxiways within 30 days. Resurfacing could begin only after the completion of this first phase. 350,000 tonnes of extremely hard concrete reinforced with rebar mats (Continuously Reinforced Concrete Pavement - CRCP) were removed in the course of the cutting process.
BENNINGHOVEN | REVOC system: Catalyst system for asphalt mixing plants
Patented REVOC system increases sustainability in the asphalt industry and secures the future of plant sites. The REVOC system has been nominated for the 2022 bauma Innovation Award in the “Climate Protection” category ...
Bauma 2022 innovations: Design Award for the new HC series
Safe, efficient and equipped for the digital construction site – these are the key features of the new HC series compactors from Hamm. The new compactors are gradually replacing the previous 3000 series and the H series. The models in the 18 to 25 t operating weight have now been awarded the prestigious iF Design Award.
Bauma 2022 innovations: REVOC system from Benninghoven
The REVOC system allows plant owners to implement higher recycling addition rates while complying with stricter emissions limits. REVOC supplements existing hot and cold recycling systems in asphalt mixing plants, reducing total carbon emissions with up to 50 % recycling material added.
For many years now, Hamm has been developing efficient machines that steadily reduce fuel consumption. In an effort to make construction site operations more resource-efficient, the ECO mode and the Power Hybrid roller in the HD+ series, for example, marked milestones. With eight electrified tandem rollers in the HD CompactLine Hamm is now entering the segment for fully electrical construction machines.
The Wirtgen Group at Bauma 2022 – Focus on sustainable road construction
At this year’s Bauma, the Wirtgen Group is presenting solutions for the entire road construction process chain. The motto for this year’s event is: ‘The Future in Roadbuilding – Smart. Safe. Sustainable.’
VÖGELE to present new Classic Line pavers at Bauma 2022
The road paver manufacturer will be introducing two new machines with pave widths of between 0.75 and 5 m at the Bauma trade fair in Munich: the compact SUPER 1300 tracked paver and the SUPER 1303 wheeled model.
World premiere of the KMA 240(i) cold mixing plant
Cold recycling technologies from Wirtgen are in use around the globe for climate-friendly and cost-effective recycling of construction materials. The new KMA 240(i) mobile cold mixing plant now makes in situ production of high-quality mixes even more efficient.
The VÖGELE product portfolio of road pavers enables users to cover practically any application in asphalt paving. The range of screeds is correspondingly broad, covering twelve models in up to five different compaction variants.
VÖGELE to present a new generation of road pavers at Bauma 2022
Bauma 2022 will be the world premiere for VÖGELE’s first road pavers and screeds of the new Dash 5 generation: the SUPER 1900-5(i) and SUPER 2100-5(i) Highway Class pavers and the latest-generation AB 500 and AB 600 Extending Screeds.
New Compact Class paver from VÖGELE at Paving Expo 2022
VÖGELE will be showing the new SUPER 1300 Compact Class paver with pave widths from 0.75 m to 5 m at Paving Expo 2022 trade fair in São Paulo. This tracked paver and the SUPER 1303 wheeled model meet the customary high quality standards of this premium German manufacturer.
The jaw crusher MOBICAT MC 110(i) EVO2 and the cone crusher MOBICONE MCO 90(i) EVO2, with their efficient crusher direct drive, have a holistic drive concept that forms the basis for high cost-effectiveness.
Wirtgen Group presents sustainable road construction solutions at WoA 2022
With a total of 11 exhibits from Wirtgen, Vögele, Hamm, Kleemann and John Deere, the specialist audience at World of Asphalt was shown a cross-section of market-oriented and holistic solutions for the entire road construction process chain. The focus at the show was set on the critical issues of cost-effectiveness and sustainability.
VÖGELE presents powerful pavers in all sizes at the trade fair
At the World of Asphalt 2022, VÖGELE presents an attractive cross section of its current product program: From the smallest road paver, the SUPER 700i, through the SUPER 1800-3i SprayJet spray paver up to the SUPER 2000-3i 10 ft paver.
Katharina Kratz is a junior development engineer at Benninghoven in Wittlich. In the interview, she talks about her apprenticeship at Benninghoven, her career start and the team spirit among her colleagues.
Trainees build a toy-size model of a Kleemann impact crusher
The fascination with Kleemann products was the deciding factor: Tim Schwarz, trainee industrial mechanic, and Tim Grabe, trainee design mechanic, demonstrated great attention to detail when they designed the model of an impact crusher, including its programming.
During construction of a carriageway in a road tunnel in Karlsruhe, Vögele road pavers and Hamm tandem rollers not only satisfied the strict emissions specifications, but also ensured efficient, high-quality paving.
Smart Doc is "self-monitoring for everyone". The new app from Hamm AG documents the compaction process in earthworks in real-time on a smartphone and allows the roller driver to easily prepare a report on the compaction.
The privately owned Swiss construction company is setting a stronger focus on the business sectors Road and Mineral Technologies and will be relying on powerful Wirtgen Group equipment with a fleet of three Vögele pavers and two Hamm rollers, a Kleemann impact crusher, a screening plant and a mobile stockpile conveyor.
Handover of a John Deere motor grader in the Emsland region of Germany
The handover of a 622GP motor grader to the Aschendorf-based road construction and civil engineering company Hermann Jansen (HJA) marks the first time that Wirtgen Deutschland Vertriebs- und Service GmbH has sold a John Deere earth-moving machine in the Bremen, Emsland, Ammerland and East Frisia region of Germany.
In Hemer, in Germany’s North-Rhine Westphalia, Vögele Compact Class machines paved a new karting track, delivering precision work in the process: over a distance of exactly 391.49 m, they paved seven hairpin bends and an obstacle - a so-called chicane - all in an incredibly small space.
In Schlag near Passau, in the heart of the so-called "granite country", Berger Rohstoffe GmbH took over a quarry in 2020. Since May 2021, a PRO plant train from Kleemann has been producing grit for high-quality concrete and impresses with high productivity and economy.
In collaboration with circuit design specialists from the Italian engineering consultants Studio Dromo, the British lead contractor Tarmac wins the race to reprofile and resurface the Silverstone Circuit in time for the British Grand Prix – with Wirtgen Group machines, plants and systems.
Environmentally friendly asphalt production with energy from biomass
When it comes to operation of an asphalt mixing plant that is as environmentally friendly and sustainable as possible, Benninghoven burner technology in combination with the selected fuel offer the greatest potential.
The alternative to conventional asphalt production is temperature-reduced asphalt, also known as low-temperature asphalt, warm asphalt or warm mix asphalt. As a company that thinks and acts with a focus on sustainability, Benninghoven has developed optimum technological solutions for this.
Premiere for a fleet of brand new asphalt road construction machines in Germany’s Westerwald region
Working with the ‘hot on hot’ method on a contract for the repair of a major road through the Westerwald, a fleet of new Vögele pavers and Hamm pneumatic-tyre and tandem rollers enabled the team from contractor Abel & Weimar from Limburg to deliver optimal paving results from start to finish.
The H 7i VIO compactor with high-performance compaction system and powerful travel drive shows off its talents when compacting a frost protection layer in Titisee-Neustadt and during dam construction along the banks of the Rhine.
The SUPER 3000-3i is not only the largest and most powerful paver, it is also versatile and user-friendly. With its new material handling concept and hydraulic tamper stroke adjustment, the large paver is really easy to adjust to varying layer thicknesses.
Smart road construction in the widest tunnel in Switzerland
Optimum coordination and maximum efficiency were required for paving a width of 11.5 m in the Gubrist tunnel, which was why the contractor put its money on VÖGELE’s WITOS Paving Plus process optimisation solution.
HP series from HAMM – new pneumatic-tyre rollers are performing impressively
The pneumatic-tyre rollers from the HP series have been on the market across the world for several months and are showing what they can do in practice. This is a completely new generation of pneumatic-tyre rollers, which have been a permanent feature of HAMM's product range since the 1960s.
The SUPER 1400 was the first Vögele paver in the world to be fitted with a powerful engine from the group’s parent, John Deere, enabling it to meet India’s more stringent CEV Stage IV emissions standards.
SPECTIVE CONNECT - the smartest form of plant control
The innovative digital operating concept SPECTIVE from Kleemann has optimised the control options of crushing plants in a trendsetting manner. With the SPECTIVE CONNECT extension, Kleemann goes one step further.
Mobile screening plants in a large-scale operation in India
India has vast reserves of iron ore and is the second biggest steel producer in the world. The mobile screening plants MOBISCREEN EVO from Kleemann are used during the extraction of the important material.
Vögele has now introduced numerous practical new features to adapt its WITOS Paving digital road construction solutions even more specifically to suit the requirements of planners, construction managers and paving crews.
For the construction of a water collection basin with a holding capacity of 18,500 m³, which is knocked into the granite rock near Brixen, NordBau Peskoller from Kiens uses the new jaw crusher MOBICAT MC 110i EVO2.
Vögele VF 500 and VF 600 front-mounted extending screeds
The North American market demands a high pave speed at highly variable pave widths. Vögele supplies the VF 500 and the VF 600 with front-mounted hydraulic extensions, which have both undergone an extensive technical update with numerous benefits for operators and owners, for just this purpose.
Ace Aggregates is a newly founded company that produces crushed rock in a reopened quarry in the West Virginian mountains. In around one year, the team has increased its production from 181,000 tons to approx. 545,000 tons per year – and delivered it.
Landfill construction with a Wirtgen Group machine train
In the course of an extension programme, Joh. Wachenfeld GmbH & Co. KG permanently sealed the base of a landfill site for demolition waste and contaminated soil in the north of the state of Hesse, Germany.
SP 15i an all-rounder when it comes to paving monolithic profiles
During a project in Esterwegen, near Papenburg, Germany, the small paver offered a first taste of the extended range of applications it can now cover by paving a 750-metre-long and 2-metre-wide cycle path along a rural road.
Daily production target with MOBISCREEN MS 952 EVO and MS 953 EVO increased
India has vast reserves of iron ore and is the second biggest steel producer in the world. The mobile screening plants MOBISCREEN EVO from Kleemann are used during the extraction of the important material in Keonjhar in India.
Two road construction professionals tested the new VÖGELE MT 3000-3i Offset material feeder on projects. In the second part, a construction manager reports on opinions of the improvements in the field.
Two road construction professionals tested the new VÖGELE MT 3000-3i Offset material feeder on projects. In the first part, a business owner reports on opinions in the field of the improvements made by development engineers.
The SUPER 1000(i) Classic Line paver and the SUPER 1300-3(i) Premium Line paver are suitable for a similar range of applications, but the scope of their functions differs. A summary of differences and similarities follows.
BENNINGHOVEN BA RPP 4000 meets requirement for maximum recycling
When high recycling ratios have to be met while complying with low emission rates, there is practically no way around the BENNINGHOVEN hot-gas generator technology. This allows the owner to turn 100 % reclaimed asphalt into new asphaltic mixtures while complying with the new German TA Luft standard.
Paving a slab track in tunnels of the Deutsche Bahn’s Stuttgart-Ulm project was tough. The paving team met the challenge with the SUPER 2100-3i including the AB 600 TP2 High Compaction Screed and 3D control system. An MT 3000-2i Offset material feeder supported job site logistics.
Cost-effective team-players from the new technology generation EVO2
Kleemann presents two new crushing plants of the EVO2 generation: the jaw crusher MOBICAT MC 110(i) EVO2 and the cone crusher MOBICONE MCO 90(i) EVO2. Thanks to innovative features such as the optimised operating concept SPECTIVE and innovative overload systems, they now operate even more efficiently and economically.
Sustainable recycling – close to the construction site
The KMA 240(i) mobile cold recycling mixing plant from Wirtgen is an ideal solution for the environmentally compatible and cost-effective production of mix close to construction sites and can convert up to 240 tons of old material an hour into a high quality mix.
Hyderabad, the capital city of Telangana, has a well-developed road network of around 9000 Kms maintained by the Greater Hyderabad Municipal Corporation (GHMC). 2900 Kms out of this road network are bituminous roads varying from single lane to four lane design. Over the years, the life of these pavements has reduced due to various factors like ageing, monsoon damages, heavy loading, etc. which then called for maintenance and recarpeting of these roads.
‘The new WIRTGEN GROUP machines are helping us to fulfil our ongoing growth targets’.
The Finnish company Asfalttikallio Oy is upgrading its fleet with a total of 39 machines from the Wirtgen Group. These include a Wirtgen W 120 Ri Small Milling Machine, Vögele Compact Class and Universal Class Pavers, as well as Hamm Rollers, mainly from the HD CompactLine.
The specialists with a passion for soil stabilisation – with Wirtgen equipment
The WR series cold recyclers and soil stabilisers from Wirtgen are one of the decisive factors in the success of Mt. Carmel Stabilization Group Inc., the construction company from Illinois (USA) specializing in soil stabilisation with lime and cement.
VÖGELE machines produce a permanent carriageway in the Albvorland Tunnel
Five water-bound base layers, stringent requirements on evenness and logistical challenges ... the contractor faced the challenge with the VÖGELE SUPER 2100-3i large paver and the MT 3000-2i Offset material feeder.
TBA 3000 produces special mixtures for Formula 1 track in Sochi
Formula 1 race tracks are one of the greatest challenges for installation teams and machinery. The Russian building contractor Tekhalyans already used Benninghoven technology during the initial construction of the SOCHI AUTODROM.
Vaccinations for Better Protection and More Freedom
In June 2021, WIRTGEN launched its own workplace vaccination program. In the specially built vaccination centre, we were able to administer the vital jab to around 300 employees who hadn’t yet been vaccinated and offer employees the chance to receive both their first and second vaccinations on site.
The good old milling machines are still around. Although no longer youngsters, and technically way behind the times, they are still raring to go and as reliable as when they were new. Day after day at Borkowski GmbH in Langerwehe anSF 1000 Cbuilt in 1991 proves that Wirtgen milling machines keep their promise of enduring quality – even after 30 years in service.
After a comprehensive environmental management system was built, HAMM AG was certified according to ISO 14001. This will help the company to continue to improve its environmental performance in the future.
Hamm receives certification for its environmental management system
The ultra-modern production facilities of the Wirtgen Group are among the most advanced of their kind and work with environmentally friendly machine tools and perfectly coordinated manufacturing processes to ensure efficient production and conserve valuable resources. And certification of this is now on the agenda for the entire group of companies.
For the complete rehabilitation of runway 1 at Kuala Lumpur International Airport, the lead contractor Nippon Road opted for an effective fleet of Wirtgen Group machines for the removal and repaving of 44,000 m³ of asphalt.
The Wirtgen Group supports its customers with individualised service agreements. SmartService makes their day-to-day operations easier and allows them to focus completely on their core business activities.
Reconstruction of a 375 km section of the A2 highway with the cold recycling method
The Nigerian Federal Ministry of Works and Housing awarded a contract for the rehabilitation of a 375 km section of the A2 highway from the capital city, Abuja, to the city of Kano in northern Nigeria with the cold recycling method to Julius Berger Nigeria Plc (JBN). Numerous Wirtgen Group plants and machines are already at work on the project.
Representatives from contractor Matthäi Bauunternehmen GmbH & Co. KG and construction machinery leasing company MILEX Rent GmbH have taken delivery of the world’s first new PowerFeeders from JOSEPH VÖGELE AG.
Complex and time-consuming changing of defective or worn conveyor belts on crushing and screening plants are a thing of the past. The new ZIP CLIP spare belts permit rapid and efficient belt changes on crushing and screening plants.
Easy handling, great service and reliable, high-performance operation – this is what sets HAMM rollers apart. This is why, among other reasons, they are ideally suited as rental machines. Models from the CompactLine are especially sought after by rental companies.
In order to receive a constant high material volume from a cone crusher with high final product quality, mobile cone crushing plants should be operated in the optimum range. This starts with the selection and composition of the correct tool, which consists of cone and bowl liner.
MC 110 Z EVO Recycling of building rubble in Göppingen
A Mobicat jaw crusher processes concrete and building rubble in Stauferpark in Göppingen. Approx. 4,500 tons of material with a feed size of 0-500 mm are crushed to 0-60 mm and are used again on site as filling material.
During the rehabilitation of the Monterey Road in San José (USA), engineering contractor MCK Services, Inc. deployed Wirtgen Group machines and recycled and replaced 42 km of pavement with an overall area of 205,000 m2.
New TBA 4000 in Moscow: the transportable asphalt mixing plant from BENNINGHOVEN supplies premium asphalt for both road rehabilitation projects on greater Moscow’s MKAD Outer Ring Road and for new roads.
Meet the young master modeller with a passion for detail
Peter Hoppe and his father, Matthias, have created a furore in the world of Lego modellers with their true-to-life scale model of a Wirtgen W 200 Fi as an MOC (‘My Own Creation’) model made from Lego and Lego Technic parts.
Intelligent paver management: At Conexpo 2020, JOSEPH VÖGELE AG will be showcasing its new software-based application for road construction. WITOS Paving Docu allows paving data and delivery notes to be recorded and automates the process of sending out job-site reports.
The SUPER 2000-3i and SUPER 2003-3i 10-foot pavers were designed primarily for highways and large-scale projects where performance and productivity are key. Both pavers come with VÖGELE’s user-friendly ErgoPlus 3 operating system.
In 2020, HAMM is represented on the market with a powerful and versatile range of compaction technology for earthwork. At CONEXPO/CON-AGG 2020, the manufacturer will underline this fact with a wide range of exhibits from the field of earthwork for diverse applications.
The 8-foot paver segment is critical to a lot of road construction companies, because these machines cover a very wide range of applications, from small municipal jobs to major highway construction and rehabilitation.
In the north of Vietnam lie the emerging city of Lang Son, located on the border with China, and National Route 1A, the heavily congested motorway to the capital, Hanoi: a KLEEMANN plant combination was brought in to eliminate this bottleneck.
When paired with the AB 220 TV Extending Screed, it can take on a remarkably wide range of pave widths from 0.5 to 3.5 m and even pave entire roads. These features make the SUPER 800i ideal for achieving a high level of machine utilization.
Conexpo-Con/Agg 2020: New Large Milling Machines the Highlight of the Wirtgen Group’s Solutions
More than 30 exhibits, including 10 world and North American premieres and Wirtgen’s new large milling machines leading the pack – this year, the Wirtgen Group is exhibiting outdoors (Silver Lot 1) at booth S 5419.
WIRTGEN GROUP provides Asfaltbolaget with a complete crushing and screening plant train from KLEEMANN
Asfaltbolaget, with its head office in Karlskrona, is a Swedish asphalt, road and landscape construction company. After all of their positive experience with WIRTGEN GROUP, it stood to reason to include crushing and screening plants from KLEEMANN in their short-list.
A SUPER 1303-3i repaved the surface course on a 3.1 m-wide tree-lined route at a thickness of 3 cm. The new pavement of sand-coloured asphalt blends harmoniously into the landscape. The VÖGELE wheeled paver in the Compact Class paved the coloured asphalt with a crown of +2.5%.
At the Wirtgen Group, fast and efficient on-site customer service has utmost priority. Customers can depend on an extensive service network and on-site solutions that ensure maximum machine availability.
With a potentially record-breaking pave width of up to 18m, the new SUPER 3000-3(i) can pave the surface course of a four-lane motorway carriageway without joints. As a representative of the Premium Line, the large paver additionally incorporates all the features of the latest "Dash 3" generation. Other highlights include the innovative material transport and the new hydraulic tamper-stroke adjustment.
Wirtgen Group Booth at Bauma 2019 Draws Record Number of Visitors
A total of 120 exhibits, including 18 world premieres and 25 innovations as well as six interactive technology demos: the Wirtgen Group’s booth at Bauma was packed with leading machine and application technologies from Wirtgen, Vögele, Hamm, Kleemann, Benninghoven, and John Deere.
The SUPER 1000(i) and the SUPER 1003(i) represent the global market leader's recently introduced Classic Line. Equipped with the ErgoBasic operating concept, the two compact pavers boast simple handling and excellent value for money.
VÖGELE present smart solution for digital job-site documentation
WITOS Paving Docu allows paving data and delivery notes to be recorded and automates the sending of job site reports. It is a practical, easy-to-use solution for small and medium-sized construction projects.
Construction Site 4.0 – the working environment of the future
At HAMM, the developers are thinking not only about the next machine generation; they are also focussed on the effects that current megatrends will have on road building in general and on compaction in particular.
Permeable to Water and with an Anti-capillary Effect
What do you see as the core issues in the construction of frost blankets? A frost blanket made from unbound mineral aggregate represents the first base course of the superstructure at the subgrade level.
Genuine Wirtgen Group spare parts are precisely tailored to the requirements of our machines and impress with particularly long service life. To ensure that our customers’ machine fleets are always ready for use, our employees around the world are committed to ensuring that our spare parts are readily and rapidly available.
In 2017, HAMM produced more than 10,000 rollers in a single year for the first time. To ensure that the demand for HAMM rollers can also be satisfied sufficiently in future, the parent plant was massively expanded.
The perfect solution for all customers, users and sales employees who are often on the road. HAMM Delivery Program/HAMM Product Range offers mobile access to the HAMM product portfolio, with all relevant information about the respective machines.
The Wirtgen Group’s service philosophy offers maximum customer proximity – and this means that the experts from Wirtgen Group Service will very soon be on the spot to clear up any issues customers may be having with their machines. This is where skilled craftsmanship meets advanced technology.
Millimeter accuracy is paramount on a track where every thousandth of a second counts, which is why, when it was time to rehabilitate the pavement, the client took the opportunity to re-profile the track, too.
Expansion of the Berlin ring road: when widening the trans-European motorway, the team frequently had to move between many small job site sections. AutoSet Plus, the automatic functions of the SUPER pavers, provided invaluable support for the paving team.
Millimeter accuracy is paramount on a track where every thousandth of a second counts, which is why, when it was time to rehabilitate the pavement, the client took the opportunity to re-profile the track, too.
On an area extending over more than 600 m², the Group will be showcasing a representative cross-section of its application-oriented products for the African market on the outdoor grounds (exhibition area T3.115) of bauma Conexpo Africa.
Swiss company Recytec continues investing in Kleemann plants
Recytec from Switzerland specialises in the processing of waste materials and materials in the recyclable mineral chain. Recytec has now extended its vehicle fleet and is participating in work on the tunnel construction project on the A1.
Wirtgen Group showcases two Introductions at World of Concrete 2017
With a display of its innovative solutions for concrete road construction, the Wirtgen Group is presenting three slipform pavers and a texture curing machine from Wirtgen and a mobile Kleemann crusher at this year's World of Concrete trade fair in Las Vegas (indoor booth no. C 6126).
Technologies from VÖGELE deliver perfect evenness: when resurfacing the A36 motorway near Dijon, a new SUPER 1900-3i paver equipped with an SB 250 TV Fixed-Width Screed and supported by an MT 3000-2i Standard PowerFeeder produced high quality results across a pave width of 7.5 m.
The Wirtgen Group, with its product brands Wirtgen, Vögele, Hamm and Kleemann, will be showcasing leading technologies for the entire road construction process chain at Excon 2017. Wirtgen’s milling machines W 195, W 120 R and slipform paver SP 62 will be celebrating their trade fair debut in India.
During a construction job in South Africa, it was scientifically proven by the University of Twente that the MT 3000-2 Offset PowerFeeder improves paving quality – among other things, using RoadScan, the innovative temperature measurement system from VÖGELE.
Innovation. Performance. Partners. Close to our customers – Wirtgen Group at Conexpo 2017
Over 40 products – many of them new to North America – will demonstrate Wirtgen Group product performance, innovation and dedication to customers at stand No. C 31239 at Conexpo-Con/Agg 2017 in Las Vegas.
Autonomous rollers: (R)evolution in asphalt construction
In the field of compaction technology, HAMM AG has always been a company that sets trends and is quick to adopt new technologies in order to continually improve its rollers. Now, the technology-focused company HAMM is once again setting new standards, this time in the development of self-driving compaction machines.
2 in 1: Rock crushing and compaction with HAMM's VC compactors
For bauma 2016 in Munich, HAMM is bringing along its VC compactors, which are now ready for series production. These compactors with a vibration crusher drum carry out two tasks simultaneously and to the highest quality standards.
Because of the dry desert winds, the work can only be carried out at night – and only for three to four months in the summer: the largest WIRTGEN slipform paver, the SP 1600, and the flexible SP 500 bring all their skills into play when paving concrete at the New Ulaanbaatar International Airport.
Cutting the red ribbon, Managing Director Pok Sum Loong, YBhg Dato’ Sri Zohari Haji Akob, the Secretary General of the Ministry of Works of Malaysia, and Stefan Wirtgen officially opened the new subsidiary Wirtgen Malaysia.
Wirtgen exhibits its complete new generation of small milling machines at bauma 2016
Right in time for bauma, the W 120 Ri small milling machine celebrates its world premiere. This rear-loader rounds out Wirtgen's new generation of small milling machines. The complete line now includes no fewer than 16 machines with milling widths from 350 to 1,300 mm.
he new visual orientation symbolizes the strength of the corporate affiliation, which has developed over the course of many years, and stands, above all, for one thing: The brands' joint focus on the needs of customers.
Since early this year, machines supplied by the Wirtgen Group have been stabilizing the entire site. These include two Wirtgen tractor-towed soil stabilizers WS 250, a Hamm H 20i compactor and a Streumaster binding agent spreader SW 16 TC.
In 2001, conventional “drilling and blasting” was regarded as the most important extraction method in the West African country. Today, however, bauxite mining is carried out exclusively using Wirtgen’s surface miners, which are more cost-effective, safer, and more environmentally friendly.
By supplying the 3800 CR as a rear loader, Wirtgen offers an efficient and flexible solution for in-situ cold recycling. However as a front loader the 3800 CR also excels as a high-performance cold milling machine.
Autostrada A1 – Europe's largest construction project
To build the A1 motorway in Poland as efficiently as possible, machines from the Wirtgen Group were almost the only equipment used during paving and compaction, including several HAMM compactors and tandem rollers.
Recycling in the megacity environmental protection in São Paulo
Recycling in the megacity environmental protection in São Paulo: The Avenida Sapopemba is the busiest road in São Paulo and one of the country’s main traffic routes. It has now been rehabilitated, making economical use of resources. In operation: the KMA 220.