Mobile cone crusher MCO 11i PRO

MCO 11i PRO Mobile cone crusher

518

US t/hr

44

in

Properties

The MOBICONE MCO 11i PRO mobile cone crusher stands out thanks to its extremely robust design and impressive performance. As an option, the plant can be operated via an external power source and impresses with its low-maintenance operation.

  • Extremely robust design
  • Very high production outputs with low-maintenance operation
  • Diesel-electric drive concept with the option to connect an external power supply
  • Ideal for combination with upstream MOBICAT MC 120 Zi PRO jaw crusher
Show less
Highlights

The MOBICONE MCO 11 PRO is distinguished by its extremely robust design and very high efficiency. As an option, the plant can be operated via an external power source and impresses with its low-maintenance operation.

Feeding unit
Continuous Feed System (CFS)
Crusher unit
Gap setting
Drive
Control system
Crusher discharge conveyor
Transport
Safety and ergonomics
Tolles Produkt

Intuitive control concept SPECTIVE - for simple operation

The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the ground.

SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localization, the description and remedy tips result in reduced downtimes. The 12" touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen or gloves.

Find out more

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Everything at a glance with WITOS®

The WITOS FleetView telematic system provides support for efficient fleet and service management. It provides information on the operating status of the machine independently of the location and time. Even users with only one machine benefit from WITOS.

From support for maintenance and diagnostic processes to the targeted control of the machines: the range of services is diversified and it is an ideal supplement to the WIRTGEN GROUP Smart Service agreements.

Find out more

Innovative diesel-electric drive concept - impressive performance with the best possible consumption values

The crushing plants are equipped with efficient, powerful diesel-electric drives. They ensure environmentally friendly operation combined with low fuel consumption.

Efficient and powerful diesel-electric drive (A) for low fuel consumption (crusher and all conveyor belts are driven electrically)

External power supply (B) for even more economic application in quarries

Find out more

Ring Bounce Detection

A smart overload protection

During ring bounce, a movement is created between the bowl and the main frame of the cone crusher as a result of excessive crushing forces. This is triggered by feed sizes that are too large or small, an excessive fine content or the continuous feeding of uncrushable material.

To protect the crusher, software continuously monitors the hydraulic pressure of the crusher overload system and reacts when necessary with two modes:

Mode 1 – PRECISE MODEfor the production of grit: The machine stops feeding if ring bounce is detected; the operator receives a fault message and can adapt his process. This mode assures that no impermissible oversize grain is produced and the machine is protected against crusher damage

Mode 2 – MIXTURE MODEfor the production of mixtures: In this mode, the machine adjusts the crushing gap - without intervention of the operator - automatically to prevent ring bounce. After a defined period without ring bounce, the gap is closed again to keep the share of oversize grain as low as possible

Technical specifications

Feed size
Feed height with extension
Feed size
9.4 in
Feed height with extension
9 ft 10 in
Crusher drive type
Crusher weight (approx.)
Crusher capacity
Crusher system size
Crusher drive type
electric
Crusher weight (approx.)
35,715 lbs
Crusher capacity
335 hp
Crusher system size
44 in
Discharge height approx.
Discharge height, extended, approx.
Crusher discharge conveyor width
Crusher discharge conveyor width, extended
Crusher discharge conveyor length
Crusher discharge conveyor length, extended
Discharge height approx.
11 ft 10 in
Discharge height, extended, approx.
13 ft 9 in
Crusher discharge conveyor width
40 in
Crusher discharge conveyor width, extended
40 in
Crusher discharge conveyor length
30 ft 6 in
Crusher discharge conveyor length, extended
35 ft 1 in
Drive concept
Generator (1500 rpm)
Performance Tier 4f/Stage IV (1500 rpm)
Drive concept
Diesel-electric drive
Generator (1500 rpm)
500 kVA
Performance Tier 4f/Stage IV (1500 rpm)
493 hp
Transport width max.
Transport height approx. (standard value)
Transport length approx.
Transport width max.
9 ft 10 in
Transport height approx. (standard value)
12 ft 8 in
Transport length approx.
57 ft 9 in

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.