WITOS FleetView FAQs

A list of frequently asked question about WITOS FleetView, sorted according to categories.

Categories
  • APPLICATIONS – content-related questions about the use of WITOS FleetView
  • SYSTEM – general information about functions, system requirements, and first steps
  • SUPPORT – troubleshooting & assistance
  • APIs – available interfaces
  • RETROFITTING – retrofit kits for various machine models
Show more Show Less

Questions and Answers about the Use of WITOS FleetView


Which data are sent from the machine?

The amount of data sent described here depends on the machine model and the software installed on the machine. The complete dataset can be sent only by machine models equipped with the latest machine software.

Your local Wirtgen Group sales & service organization will be pleased to check whether the latest software is installed on your machine or whether a software update or upgrade is requiredS

The data that can be sent are listed here:

What do the various symbols and icons mean?

Refresh
Select all
Review period
Download
Export.csv
Export.pdf
Activate / deactivate filters
Add filter
Delete filter
Delete
Machine path
Cancel selection
Invert selection
Radius search

Can I export data from WITOS FleetView?

Yes, the data in WITOS FleetView can be exported. On the pages with table views, clicking on the Excel icon at the bottom of the table exports the data displayed as a CSV file.


Questions and Answers about the WITOS FleetView System

How do I sign in to WITOS FleetView?

WITOS FleetView is a web-based app. Simply enter the address www.witos.com in your browser, hit return, and sign in with your login data. You can get your login data from your administrator or local Wirtgen Group sales & service organization.

Which browsers support WITOS FleetView?

WITOS FleetView is supported by the most commonly used browsers on Windows operating systems. Settings and configurations defined in WITOS FleetView are saved to a user profile on the server. This makes it possible to access your data from various different computers.

You can check if your current operating system fulfills the requirements for using the WITOS FleetView web-app by clicking on the following link: https://ready.witos.wirtgen-group.com/

If the front end check was successful, you can start using WITOS FleetView right away. Detailed information about system requirements can be found in the front end check:

What are the minimum system requirements for WITOS FleetView?

System Requirements
CPU Intel Pentium 1 GHz or faster (recommended)
RAM 2 GB or higher (recommended)
HDD 10 GB usable memory (recommended)
Screen resolution 16-bit, 1024 x 768 or higher (recommended)

In which languages is WITOS offered?

WITOS FleetView is currently available in the following languages:

  • German
  • English (GB/US)
  • French
  • Spanish
  • Italian
  • Dutch
  • Danish
  • Norwegian
  • Swedish
  • Polish
  • Czech
  • Hungarian
  • Russian

Questions and Answers about Support for WITOS FleetView


I can access WITOS FleetView, but I can’t see my machine.

Every machine must be registered before it can be seen. The registration process is provided by your local Wirtgen Group sales & service organization. Please get in touch with them to get your machine registered.

I can see only one of my machines in WITOS FleetView. Yesterday, WITOS FleetView they were all there.

A further filtering option is the quick search function on the fleet page. Please check it to see if anything has been entered here, if it has, delete the entries.

You can also use a radius filter in map view. This shows you only the machines located within a target area you define. If a geofilter is active, this is indicated by an illuminated globe icon on the fleet page. The selected area is displayed in the map view. To deactivate it, click on the illuminated globe icon on the fleet page. You must also click on the globe icon on the map page and then on the recycle bin icon to delete the filter.

WITOS FleetView offers various different filtering options. For example, you can filter according to any visible column to receive a tightly focused selection of machines. The lamp icon at the bottom edge of the page on the website will light up when you are using such a filter. Please click on this icon to delete all active filters. Once you have done all this, you should be able to see all of your machines again.

Your machines are all back on the map.

I can see all my machines in WITOS FleetView, but the map on the fleet page always shows only Germany.

This indicates that the machines have not yet sent any data, or that there could be a problem with the GPS signal. Please check whether machine data such as fuel consumption, fuel level. or operating hours are being sent. You should also check whether there is a date and time in the box of the ‘End of recording interval’ parameter. If these data are also not being sent, the machine has not yet sent any data.

If this is the case, please contact your local Wirtgen Group sales & service organization for further advice.

If the other data have been sent, there must be a problem with the GPS signal, which means that the next step is to check the connections of the antennas. If the connections are in order, please contact your local Wirtgen Group sales & service organization for further advice.

I can see my machine in WITOS FleetView, but the position isn’t right.

This indicates that there could be a problem with the GPS signal. Please check whether machine data such as fuel consumption, fuel level. or operating hours are being sent. Please also check if there is a date and time in the box of the ‘End of recording interval’ parameter, and if it is right. If the date is correct, there must be a problem with the GPS signal; if it is not correct, the problem must be with the TCU.

In the first case, you should check the connections between the telematics unit and the antenna. If the connections are in order, please contact your local Wirtgen Group sales & service organization for further advice.

Questions and Answers about Interfaces (APIs) with WITOS FleetView


Are there interfaces (APIs) I can use to access data from WITOS FleetView?

Yes, various different APIs are available. The data sent correspond to the most commonly applicable standards.

  • AEMP(1.2)-REST -> 1 h interval
  • AEMP(1.2)-SOAP -> 1 h interval
  • WIFMS -> 5 min interval
  • ISO/TS 15143-3 (AEMP 2.0) -> 5 min interval

How do I get access to the interfaces (APIs)?

Please contact your local Wirtgen Group sales & service organization to get access to the interfaces (APIs).

They will provide you with the access data and a user manual.

Will additional costs be due if I use more than one interface (API)?

No, the use of the APIs involves no additional costs. The APIs are all part of the WITOS FleetView package.

Questions and Answers about Retrofit Kits for WITOS FleetView

WITOS FleetView has been a part of the standard equipment of our machines since 2018. WITOS FleetView can therefore be used in approved countries.

Retrofit kits (cable set + TCU) are available for numerous model series.

My machine doesn’t have WITOS FleetView. Can I have it retrofitted?

Retrofit kits enable the installation of WITOS FleetView on numerous Wirtgen Group machines. We suggest that you visit our parts website and check whether there is a retrofit kit available for your particular machine.

Wirtgen https://parts.wirtgen-group.com/ocs/de-de/parts/telematik-226-c/

Vögele https://parts.wirtgen-group.com/ocs/de-de/parts/telematik-288-c/

Hamm https://parts.wirtgen-group.com/ocs/de-de/parts/telematik-328-c/

Kleemann https://parts.wirtgen-group.com/kontakt

Alternatively, you can also contact your local Wirtgen Group sales & service organization. They will be pleased to check if a retrofit solution is available for your needs, will make you an offer, and discuss all further steps with you.

Please feel free to contact us if you couldn’t find a satisfactory answer to your question.

Contact