Mobile impact crusher MR 130 Z EVO2

MR 130 Z EVO2 Mobile impact crusher

450

t/h

1300 mm x 900 mm

Properties

The mobile impact crusher MOBIREX MR 130 Z EVO2 can be deployed universally as an all-rounder and produces first class final product quality. With a crusher inlet width of 1300 mm, it achieves a production rate that until now was only associated with considerably larger crushing plant. This is made possible by outstanding cost effectiveness and performance with a variety of technical highlights. Thanks to the compact design, the plant is easy to transport and can be assembled and disassembled again quickly.

  • Optimised material flow as a result of extending system widths
  • Hydraulic gap setting
  • Simple and intuitive SPECTIVE control concept
  • Efficient and powerful diesel direct drive
  • High-performance secondary screening unit with oversize grain returning (option)
Show less
Highlights

Wide variety of applications, simple transportation, short setup times, high machine availability: the mobile impact crusher MOBIREX EVO2

Feeding unit
Prescreening
CFS (Continuous Feed System)
Crusher unit
Drive
Control system
Secondary screening unit
Material flow
Accessibility and safety
Environment
Magnet and wind sifter
Quick Track
Transport
Transport of secondary screening unit
Prescreen coverings
Screen covering change
Rotor ledges
Crushing gap
Overload protection
Tolles Produkt

Intuitive control concept SPECTIVE - for simple operation

The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the ground.

SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localisation, the description and remedy tips result in reduced downtimes. The 12" touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen or gloves.

Find out more

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilisation is optimised. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Everything at a glance with WITOS®

The WITOS FleetView telematic system provides support for efficient fleet and service management. It provides information on the operating status of the machine independently of the location and time. Even users with only one machine benefit from WITOS.

From support for maintenance and diagnostic processes to the targeted control of the machines: the range of services is diversified and it is an ideal supplement to the WIRTGEN GROUP Smart Service agreements.

Find out more

Lock & Turn – outstanding safety system

The "Lock & Turn” system provides the highest level of safety during rotor ledge change and releasing bridging. Special keys for service flaps and components guarantee that uncontrolled movements of dangerous components are not possible and the plant or crusher cannot be started when maintenance is being carried out.

A standard series rotating device also allows the rotor of the crusher to be turned and blocked manually in any position from the outside. This enables the simple and safe replacement of rotor ledges and removal of material bridging.

Find out more
Tolles Produkt

Always in operation with "Quick Track"

In some applications – for example in road construction – relocation of the crushing plant several times a day is necessary. When this is done, the plant should remain in operating mode so that it is quickly ready for operation again after it has been moved. The "Quick Track" option allows this to be controlled conveniently via the remote control – without leaving the operating mode.

Thanks to the time-saving (excavator driver does not need to go to the display, change operating mode, machine operation is not interrupted and therefore does not need to be started up again), the machine can continue working fast and productively.

Technical specifications

Feed size
Feeding height
Feed height with extension
Feed capacity up to approx.
Hopper width
Hopper width with extension
Hopper length
Hopper length with extension
Hopper volume
Hopper volume with extension
Feed size
1040 mm x 650 mm
Feeding height
4,350 mm
Feed height with extension
4,710 mm
Feed capacity up to approx.
450 t/h
Hopper width
2,250 mm
Hopper width with extension
3,000 mm
Hopper length
3,700 mm
Hopper length with extension
3,700 mm
Hopper volume
5 m³
Hopper volume with extension
9 m³
Width
Length
Width
1,100 mm
Length
2,615 mm
Width
Length
Model
Width
1,210 mm
Length
2,300 mm
Model
Triple-deck heavy-piece screen
Discharge height
Discharge height, extended
Width
Length
Length, extended
Discharge height
2,900 mm
Discharge height, extended
3,650 mm
Width
650 mm
Length
4,000 mm
Length, extended
6,000 mm
Crusher drive type
Crusher inlet (W x D)
Crusher weight (approx.)
Crushing power
Rotor diameter
Adjustment of impact toggles
Crusher drive type
Direct
Crusher inlet (W x D)
1300 mm x 900 mm
Crusher weight (approx.)
16,500 kg
Crushing power
310 kW
Rotor diameter
1,200 mm
Adjustment of impact toggles
Can be raised and lowered hydraulically, resetting by gravitational force
Crushing capacity demolished asphalt up to approx.
Crushing capacity rubble up to approx.
Crushing capacity demolished concrete up to approx.
Crushing capacity limestone up to approx.
Crushing capacity demolished asphalt up to approx.
260 t/h
Crushing capacity rubble up to approx.
300 t/h
Crushing capacity demolished concrete up to approx.
300 t/h
Crushing capacity limestone up to approx.
340 t/h
Discharge height approx.
Discharge height, extended approx.
Crusher discharge conveyor width
Crusher discharge conveyor width, extended
Crusher discharge conveyor length
Crusher discharge conveyor length, extended
Discharge height approx.
3,650 mm
Discharge height, extended approx.
4,200 mm
Crusher discharge conveyor width
1,400 mm
Crusher discharge conveyor width, extended
1,400 mm
Crusher discharge conveyor length
9,700 mm
Crusher discharge conveyor length, extended
11,300 mm
Crusher vibrating extractor width
Crusher vibrating extractor length
Crusher vibrating extractor width
1,400 mm
Crusher vibrating extractor length
2,700 mm
Drive concept
Generator (1500 rpm)
Output LRC (1500 rpm)
Output Tier 3 / Stage IIIA (1500 rpm)
Drive concept
Diesel-electric direct drive
Generator (1500 rpm)
135 kVA
Output LRC (1500 rpm)
410 kW
Output Tier 3 / Stage IIIA (1500 rpm)
371 kW
Transport width max.
Transport width with secondary screening unit max.
Transport weight with secondary screening unit min. approx.
Transport weight of screening unit
Transport height approx. (default value)
Transport length approx.
Transport length with secondary screening unit approx.
Transport width max.
3,000 mm
Transport width with secondary screening unit max.
3,150 mm
Transport weight with secondary screening unit min. approx.
60,600 kg
Transport weight of screening unit
6,400 kg
Transport height approx. (default value)
3,750 mm
Transport length approx.
18,385 mm
Transport length with secondary screening unit approx.
21,620 mm
Discharge height fine grain discharge conveyor approx.
Width approx.
Length approx.
Model
Oversize grain return conveyor width
Oversize grain return conveyor length
Discharge height fine grain discharge conveyor approx.
3,580 mm
Width approx.
1,550 mm
Length approx.
4,550 mm
Model
Single-deck lightweight screen
Oversize grain return conveyor width
500 mm
Oversize grain return conveyor length
9,750 mm

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.