Cold milling machines

image

Efficient milling and granulating of road pavements

Asphalt and concrete pavements can be cost-effectively removed with cold milling machines. The range of applications extends from the complete removal of asphalt and concrete to the layer-by-layer removal and levelling of asphalt and concrete surfaces. With WIRTGEN cold milling machines, it is possible to machine working widths from 35 cm up to 4.40 m and working depths up to 35 cm in a single pass. In addition, a large number of different milling drums, such as ECO cutters or fine milling drums, ensure that machines can be used with a high degree of flexibility.

Small milling machines

Small milling machines are equipped with a wheeled chassis and a milling drum positioned at the rear. The granulated RAP which is broken up by the rotating milling drum is transferred to a slewing and height-adjustable discharge conveyor and immediately loaded onto waiting transport vehicles. The compact rear loaders are highly maneuverable and their rear right wheel can be swiveled in when milling flush to the edges of obstacles. A variety of different milling drums are available, enabling the small milling machines to cover a wide range of applications extending from partial pavement rehabilitations and tie-in milling to the rehabilitation of industrial floors.

W 35 Ri Small milling machines
W 35 Ri

Small milling machines

Milling width
350 mm
Milling depth max.
110 mm
Maximum power 45 kW / 61 HP 2,300 rpm
Operating weight, CE
4,650 kg
W 50 Ri Small milling machines
W 50 Ri

Small milling machines

Milling width
500 mm
Milling depth max.
210 mm
Maximum power 105 kW / 143 HP
Operating weight, CE
6,930 kg
W 60 Ri Small milling machines
W 60 Ri

Small milling machines

Milling width
600 mm
Milling depth max.
210 mm
Maximum power 105 kW / 143 HP
Operating weight, CE
7,450 kg
W 100 Ri Small milling machines
W 100 Ri

Small milling machines

Milling width
1,000 mm
Milling depth max.
300 mm
Maximum power 160 kW / 218 HP
Operating weight, CE
14,850 kg
W 120 Ri Small milling machines
W 120 Ri

Small milling machines

Milling width
1,200 mm
Milling depth max.
300 mm
Maximum power 160 kW / 218 HP
Operating weight, CE
15,500 kg
News & Job reports

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.