Cold recycler  W 240 CR

W 240 CR Cold recycler

EU not rated/US EPA Tier 2

2,350 mm

350

mm

High-quality in-place cold recycling

  • Machines from the CR series are used as part of a paving train for cost-effective, in-place cold recycling of road pavements in a single pass by adding cement, water and/or bitumen emulsion, or foamed bitumen at a mixing performance of up to 800 t/h
  • The high-performance W 240 CR with rear loading and working width of 2,350 mm is ideally suitable for renovation of road pavements in confined construction site conditions and can also be easily transported as a unit
  • Lateral pre-milling also enables the cold recyclers to flexibly rehabilitate road surfaces with widths greater than the machine’s working width in a single pass.
  • If required, cold recyclers can also be used as high-performance milling machines or for the granulation of pavement structures.
Show less

Technical specifications

Exhaust emissions category
Operating and travel speed
Working width
Working depth
Operating weight, CE
Displacement
Maximum power
Rated power
Exhaust emissions category
EU not rated/US EPA Tier 2
Operating and travel speed
0 - 88 m/min (0 - 5.3 m/min )
Working width
2,350 mm
Working depth
350 mm
Operating weight, CE
48,500 kg
Displacement
27.2 l
Maximum power
708 kW / 963 HP 1,800 rpm
Rated power
708 kW / 963 HP

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.