Rehabilitation of a steep farm track

11% slope, 100% quality

The VÖGELE SUPER 1803-3i wheeled paver proved its prowess when constructing a farm track in the Swiss Alps.

Switzerland | Castiel

Paving asphalt to a high standard of quality is a demanding task in itself. But projects in mountain regions such as the Swiss Alps present additional challenges. Extreme slopes, narrow roads and steep precipices place high demands on the paving team and the machine technology alike. In the mountain village of Castiel, located in the Arosa district in the Swiss canton of Graubünden, HEW Bauunternehmung AG rehabilitated a combined base and surface course using a VÖGELE SUPER 1803-3i wheeled paver. The project involved rehabilitating a farm track with an extreme gradient of up to 11% designed for vehicles up to 18t, while working at an altitude of 1,200m. The basic parameters thus corresponded to a typical application for the SUPER 1803-3i.

“Despite the difficult conditions, we managed to complete the paving job in one shift. The SUPER 1803-3i plays an immense part in the cost efficiency of such small construction projects – and it’s fun to work with, too!”

André Deflorin, Construction Manager HWE Bauunternehmung AG

3.50 m

Pivot Steer delivers extreme manœvrability: this steering brake automatically slows down the rear inside wheel on bends hydraulically, reducing the outer turning circle further during positioning manœuvres and paving.

SUPER 1803-3i delivers efficiency on one-day construction jobs

The high traction and manœuvrability were key on the job site in Castiel. With the SUPER 1803-3i, “working on extreme slopes is almost as simple as on flat terrain,” says Oliveira Rodrigues Hugo, a paver operator. The wheeled paver’s powerful drive and material handling system made it easy for the team to complete the job in one shift. According to the HEW paving team, the paver’s short set-up times were also a contributing factor.

VÖGELE sensors for grade and slope control, for instance, can be connected according to the plug&play principle: the VÖGELE Niveltronic Plus System for Automated Grade and Slope Control detects the connected sensor automatically. The screed operator then just defines the specified values using the quick set-up function – and the work can begin. When the job is done, the SUPER 1803-3i also makes a quick exit: it can travel at up to 20km/h under its own power.

“Thanks to its high traction and manœuvrability, the SUPER 1803-3i makes paving on extreme slopes almost as easy as on flat terrain.”

Oliveira Rodrigues Hugo, Paver Operator HEW Bauunternehmung AG

Job site details

Rehabilitation of the combined base and surface course on a steep farm track in Arosa, Switzerland

Length of section:
Descending slope:

Working parameters
Pave width:
Pave speed:
Layer thickness:
Material
Combined base and surface course:
Paved material quantity:
Equipment
VÖGELE SUPER 1803-3i wheeled paver with AB 500 TV Extending Screed
HAMM HD 13 VT tandem roller
Descending slope:
11% (approx.)

Working parameters
Pave width:
3.3 m
Pave speed:
2 m/min
Layer thickness:
7 cm
Material
Combined base and surface course:
AC 16 TD LW
Paved material quantity:
100 t
Equipment
VÖGELE SUPER 1803-3i wheeled paver with AB 500 TV Extending Screed
HAMM HD 13 VT tandem roller
Highlights of the SUPER 1803-3i: The powerful wheeled paver
  • Undercarriage with high tractive power thanks to separate hydraulic drives
  • Optional Pivot Steer steering brake raises the already high manœuvrability
  • Rapid transport under its own power at up to 20km/h
Show more Show less