New MOBICAT MC 120 Zi PRO jaw crusher from Kleemann celebrates its debut at CONEXPO/AGG 2020

With an output of up to 717 US tons per hour, the MOBICAT MC 120 Zi PRO is impressive in natural rock applications. The powerful jaw crusher has a feed opening of 48" x 32" and is equipped with an extra long articulated crusher jaw. To ensure the best possible material flow, the continuous feed system (CFS) adapts the conveying speed to the fill level of the crusher. On most jaw crushing systems, the operator has the time-consuming task of clearing the crushing chamber in the event of material blockages. Not so with the optional crusher unblocking system. Should material bridging occur in the jaw crusher, the crusher can be reversed with the aid of the electric crusher drive and in this way the blockage can be cleared in no time. The machines of the PRO line can be operated with the simple SPECTIVE control system via a 12 inch touch panel. All components and functions can be controlled conveniently from the ground.

The mobile MOBICONE MCO 11i PRO cone crusher is also on display and is the perfect secondary crushing screen of the MC 120 Zi PRO. Harmonized in size and performance, the MCO 11i PRO has a maximum output of 518 US tons per hour. Also part of the PRO line, this crusher is built without compromise in the same sturdy manner and designed for permanent quarrying operation.

The mobile impact crushers of the EVO2 series are designed so that they can be transported easily and made ready for operation in a short space of time. Moreover, the direct diesel drive concept ensures a high output while simultaneously keeping consumption low. For better capacity utilization and productivity, the system widths of the impact crusher plant open in the direction of material flow. The plant is also operated using the intuitive SPECTIVE control concept. The overall system itself impresses with an output of up to 496 US tons per hour.

Kleemann's presence at the Conexpo trade fair is rounded off by the double-decker MOBISCREEN MS 952i EVO classifying screen. Just like the MOBIREX MR 130 Zi EVO2 impact crusher, the screening plant of the EVO line can be deployed flexibly thanks to good transport dimensions and short setup times. These advantages make it the first choice for crushing plant contractors not only in recycling but also quarrying. The MS 952i EVO has a screening surface of 5' 1" x 20' and boasts an output of up to 550 US tons per hour. The high output is largely attributable to the good material flow through the plant. This starts with loading, which can be carried out both by wheel loader and upstream crushing plant thanks to the generous feed hopper. The material is then transported on the extra wide feeding conveyor of 3' 11" to the screen casing.