ErgoBasic paver operator’s console
ErgoBasic paver operator’s console
Everything at a glance: the functions are arranged in a clear, logical and practical layout that has clearly been inspired by the ErgoPlus operating console. The type of controls and the symbols used are all in line with those on an ErgoPlus console Given the limited number of functions, there is no need for a display.
The status of all settings is indicated as a percentage on LED strips immediately next to the relevant functions.
LEDs also indicate the set speeds for the augers and the compacting systems as well as the fill level of the fuel tank.
Function and status indicators
Operating mode selection
Auger speed
Speed ranges
Compaction performance
Steering at a pre-set angle
Function and status indicators
The function and status indicators mean that the operator always has full control over his machine. He can, for instance, read the fill level of the fuel tank directly and identify whether there are any functional faults.
Selecting operating mode
At the push of a button, the paver switches between operating modes in the following order: “Pave”, “Positioning”, “Job Site” and “Neutral”. An LED indicates which mode is selected.
Auger speed
In automatic mode, the maximum speed of the augers can be adapted to pave width separately for the left and right using the plus and minus keys. The set value is displayed as a percentage on the LED strip.
Speed ranges of the diesel engine
For the diesel engine, there are three modes to choose from: MIN, ECO and MAX. The desired mode can be set easily using the arrow keys. In ECO mode, the engine delivers sufficient power for a great number of paving applications. Operating in ECO mode reduces noise emissions and fuel consumption considerably.
Compaction performance
The speed of the compacting system can be set directly on the operator‘s console. The LED strip from 0 to 100% indicates the set speed for the vibrators. If necessary, compaction performance can be adjusted quickly and easily using the plus and minus buttons.
Steering at a pre-set angle
The machine is steered by a rotary controller which enables the paver operator to manœuvre the machine precisely even in the tightest spots. For long curves with a constant radius, the desired steering angle can be preselected using arrow keys. The paver automatically follows the set path until this function is deactivated, allowing the driver to monitor the paving process undisturbed.
