Marco Offenhausen, general manager at Papenburg, is impressed with the efficiency of the Kleemann impact crusher: "We have a remarkable output of 150 to 200 tons an hour. Work with the MOBIREX EVO2 is absolutely reliable and it can be deployed flexibly." The quality of the processed material is also impressive and the machine works very efficiently with regard to fuel and power consumption. A further positive feature is its mobility. If the plant is moved, it is ready for operation again in a very short time. From overload protection through modern safety elements and on to the intuitive control concept SPECTIVE. "In a whole range of areas, it's obvious that Kleemann's development work was tuned very closely to work in practice", says the general manager, "and this applies to each individual part". Good example: the ZIP CLIP conveyor belts, which make a belt change very simple.
ZIP CLIP conveyor belts – time savings that pay off
Conveyor belts are essential components of crushing and screening plants, but they are also wear parts. Their quality is reflected directly in efficiency and operating costs. Another positive feature: the time required for assembly and disassembly of new conveyor belts because, depending on the system, this is more or less extensive. Standard systems usually have endless conveyor belts installed, which can be fitted in closed state on the belt conveyor. Disadvantage: they can only be changed on the work site with high time expenditure because the belt conveyor has to be disassembled.
This is where the open conveyor belts have an advantage: in case of damage or tears, they can be fitted on the plant directly on site. However, the belts are closed by means of vulcanisation – work that has to be completed by an external service provider. The vulcanised area also requires a curing time of several hours, which results in machine downtime.