In times of ever-increasing demands on construction sites, two Vögele technologies play out their strengths
Road construction contractors have to meet increasingly stricter requirements on asphalt paving projects – and try to remain competitive at the same time. With InLine Pave and SprayJet, Vögele offers two methods that enable faster and more efficient realisation of paving projects with lower overall costs.
Project completion deadlines in road construction are tight, especially when they involve the construction or rehabilitation of heavily frequented arterial roads. At the same time, tendering authorities demand the highest paving quality. Additional pressures come from stricter environmental regulations and the call for resource-efficient construction methods – while road construction companies struggle with rising material and labour costs. The InLine Pave and SprayJet technologies from Vögele are designed to precisely meet these requirements. The two paving methods are suitable for a variety of applications, they have been tried and tested for years and are in use around the globe.
The InLine Pave concept is particularly suitable for the construction and renovation of motorways and expressways – and wherever roads need to be reopened to traffic again as soon as possible. The name says it all, three machines work‘in line’, one after the other: The material feeder takes up the delivered binder course or surface course mix and conveys it to the SUPER 2100-3(i) IP binder course paver. With its AB 600 TP2 Plus Vögele high compaction screed, it is the heart and soul of the paving train. The binder course is compacted during paving with values of up to 98%, so high that the subsequent paver can already drive over it. The binder course paver also has a special transfer module that conveys the surface course material directly into the receiving hopper of the third machine – a SUPER 1800 of the Dash 3 or Dash 5 generation, which then paves the surface course.
‘Hot on hot’ in a single operation: In the InLine Pave process, the binder course and the surface course are paved in a single pass.
“Hot-on-hot” paving has several advantages: The binder course and surface course interlock optimally, which increases the quality and service life of the surface course. The proportion of surface course relative to binder course can also be reduced. That improves the stability of the pavement thanks to the higher proportion of stable binder course, This prevents deformation of the road. On the other hand, less expensive top layer material is required. Compared with conventional paving, there is no need for spraying with bitumen emulsion as a bonding bridge, which also saves material, working time, and, in turn, money.
Apart from the binder course paver, all the other machines deployed in an InLine-Pave train are only slightly modified standard machines. This simplifies operating for the crew, and the contractor can make better use of the machine fleet. Both the material feeder and the surface course paver can be used any time on conventional construction projects without further modification, and the transfer module of the SUPER 2100-3(i) IP binder course paver can also be installed or removed depending on the application.
If a surface course needs renewing, the paving of ultra-thin bonded wearing courses on a sealant is an interesting technology for cost-effective, efficient, and resource-friendly paving. With the SUPER 1800-3(i) SprayJet, Vögele has a special spray paver in its range that has already proven itself in projects all over the world. In a single operation, it sprays a bitumen emulsion onto the old pavement and lays the new surface course.
The five spray bars with a total of 24 nozzles enable seamless application of the emulsion across varying paving widths of up to 6 meters. The SprayJet module is a self-contained functional unit, meaning that the SUPER 1800-3i SprayJet can also be used as a conventional road paver. The module is easy to maintain and ideally integrated into the ErgoPlus 3 Vögele operating concept. Operators will therefore also find their familiar working environment on this machine, which saves time spent on lengthy training sessions.
Extreme versatility: the SUPER 1800-3(i) SprayJet from Vögele is a globally unique spray paver for paving ultra-thin bonded wearing courses as well as conventional surface layers and binder courses.
The SprayJet technology is generally suitable for all paved surfaces used by traffic and is particularly efficient: The paving speed is often significantly higher than with conventional paving methods, and, as the layer thickness is usually only 2 cm instead of the usual 4 cm, up to 50% of the costly surface layer material otherwise required can be saved.
The SprayJet method is also convincing in terms of quality: As the emulsion is sprayed on and the surface course is applied in a single operation, the binding agent film cannot be accidentally driven over and damaged by construction vehicles. The binding agent film seals the entire lower layer and provides an effective barrier against water. This can also increases the service life of the road.
Two processes for all needs
Whether for rehabilitation, construction from new, or inner-city construction projects: With InLine Pave and SprayJet, Vögele offers two technologies that take into account the challenges faced by road construction contractors as well as the client’s specifications – constructing or rehabilitating roads faster and more efficiently, using less material and thus conserving resources without compromising on quality.
Media & Press
Click here to download a ZIP file containing the press release in the available languages in Microsoft Word format and the images in 300 dpi resolution.
Download