Offset slipform pavers SP 15

SP 15 Offset slipform pavers

10,350

kg

1,300

mm

Compact offset slipform paver for monolithic profiles and narrow paths

  • The compact slipform paver paves a wide range of monolithic profiles up to 1.3 m high.
  • It can be used to easily pave concrete surfaces up to 2.2 m wide (cannot be combined with all options).
  • The slipform paver is perfect for building sites that require a high degree of manoeuvrability, tight turning angles and maximum flexibility.
  • Two crawler units with parallelogram swing arms at the front and a movable crawler unit at the rear offer maximum flexibility and make zero-clearance paving possible.
  • The machine can be precisely controlled via stringline scanning, without a stringline using WIRTGEN AutoPilot 2.0 or via 3D applications.
Show less
SP15i 00099 HI
Autopilot 2.0: Automatic 3D control system (HI)
Autopilot 2.0: Automatic 3D control system (HI)
Autopilot 2.0 Automatic 3D control system HI
SP 15 | SP 15i Quick change mold mounting system HI (EN-GB)
SP 15 | SP 15i 3D Applications HI (EN-GB)
SP 15 | SP 15i Additional sensor on bends HI (EN-GB)
SP 15 | SP 15i Adjustments at the machine HI (EN-GB)
SP 15 | SP 15i Simple conversation from left to right HI (EN-GB)
SP 15 | SP 15i Typical applications HI (EN-GB)
SP15i web 00128 HI
SP15 02708 HI
SP15i 00077 HI
SP15i 00133 HI
Highlights
Highly flexible offset mould system
High-quality machine management system
Steering and drive system in line with field requirements
Efficient diesel engine control
Autopilot - efficient, stringless machine control system
Future-proof 3D interface
Premium-class cross slope control
Intelligent transport concept
Ease of operation
Modular adaptability

Slipform paving Offset

In offset application, mixer trucks deliver the concrete into the receiving hopper of the slipform paver. Transport to the mould is effected via a slewable belt or auger conveyor. Depending on the paver model, the belt conveyor is available in different lengths and in folding design. The auger conveyor is also available in different designs. And whether belt or auger conveyor: all settings, such as conveying speed, angle of incline or position can be made at the mere push of a button.

Learn more

WIRTGEN levelling technology

WIRTGEN levelling technology controls height, depth and slope to achieve results of maximum precision. In the process, the system continuously reconciles the actual values with a preselected target value, correcting any deviations by means of proportional control. State-of-the-art machine engineering ensures levelling results of consistently high quality while at the same time relieving the machine operator of a significant part of his workload.

WIRTGEN offers customers reliable hardware and software developed in-house. Different systems are used depending on the construction project to be completed and local conditions on site.

Learn more

WIRTGEN AutoPilot 2.0

Automatic 3D control system for SP 15 / SP 15i / SP 25 / SP 25i

WIRTGEN provides customers with AutoPilot 2.0, an innovative and economical alternative system for steering regulation via stringline or other 3D machine control systems developed in-house.

The system is based on GNSS (Global Navigation Satellite System) and assists with the automated paving of a wide variety of offset and inset profiles, such as concrete safety barriers on motorways or curbs for traffic islands. As opposed to conventional 3D systems, the digital data model is created right on the construction site. Even complex profile configurations can be created right on site and within a short period of time.

Major advantage of the system: it dispenses with time-consuming surveying operations, the installation and removal of stringline or the preparation of a geodetic data model.

Learn more

Technical specifications

Exhaust emissions category
Exhaust emissions category

Emission values classified by standard, e.g. EPA, EU, etc.

Number of track units
Operating weight, CE
Operating weight, CE

Weight of machine, half weight of all operating agents, on-board tools, machine operator, no optional equipment features

Displacement
Hydraulic height adjustment
Max. mould width
Max. mould width

Paving width up to 2,200 mm on request

Max. mould height
Max. mould height

Please consult factory for different offset geometries or special applications

Height adjustment, mechanical
Rated power
Lateral adjustment of mould
Exhaust emissions category
EU Stage 3a/US EPA Tier 3
Number of track units
3
Operating weight, CE
10,350 kg
Displacement
4 l
Hydraulic height adjustment
1,000 mm
Max. mould width
1,800 mm
Max. mould height
1,300 mm
Height adjustment, mechanical
280 mm
Rated power
92 kW / 125 HP
Lateral adjustment of mould
700 mm
Downloads
English (GB) (9.9 MB) Chinese (CN) (10.3 MB)German (DE) (9.9 MB)Portuguese (BR) (10.4 MB)
English (GB) (2.7 MB) English (US) (2.6 MB)French (FR) (2.4 MB)German (DE) (2.7 MB)
News & Job reports

During a project in Esterwegen, near Papenburg, Germany, the small paver offered a first taste of the extended range of applications it can now cover by paving a 750-metre-long and 2-metre-wide cycle path along a rural road.

Paving operation in a confined space
Continue reading
Contact us for quotes and prices!

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.