A flagship project for the industry
Oblique view of the cylindrical hot gas generator at the PORR plant in Simmering from above.

Austria’s first asphalt mixing plant to Retrofit hot gas generator technology

The Retrofit solution from Benninghoven enables the use of high RAP feed rates, a high level of flexibility in production processes to allow for frequent recipe changes and contributes to the reduction of emissions.

Ready for the future: With the retrofitted hot gas generator using the counterflow principle, the existing PORR plant in Vienna Simmering can now handle high RAP feed rates while simultaneously contributing to the reduction of CO₂ emissions in the production of new asphalt paving mixes. Another benefit of this technology is the ability to maximise the proportion of RAP material in all recipes. Thanks to the hot gas generator, the RAP material already achieves the final product temperature of 160 °C, with high RAP feed rates being easily achievable, even with frequent recipe changes. The plant is the first asphalt mixing plant in Austria to be Retrofit retrofitted with hot gas generator technology. This makes it one of the country’s most innovative asphalt mixing plants and a flagship project for the industry.

The first plant in Austria to be Retrofitted with hot gas generator technology. With this retrofit, PORR now operates the country’s most modern asphalt mixing plant at its site in Simmering.

PORR is one of Austria’s most prominent construction contractors and is active in all areas of the construction industry – including asphalt production. In Austria alone, PORR operates 29 asphalt mixing plants. At the site in Vienna’s Simmering district, some 30,000 tonnes of asphalt with a variety of recipes are produced every month. PORR supplies the City of Vienna with mastic asphalt for tramway construction and hot-rolled asphalt, and offers a wide variety of recipes to meet the most demanding requirements of its many customers. This enormous production volume highlights the plant’s economic efficiency. In line with PORR’s internal closed-loop economy strategy, which seeks to maximise RAP feed rates while minimising emissions and maintaining best possible flexibility, the company decided to upgrade its plant by investing in an advanced recycling technology. Benninghoven was the first name that came to mind as a strong partner for this project.

‘There is definitely demand for recycled construction materials on the market and we keep receiving requests from customers for this.’

Karl-Heinz Strauss, CEO PORR

Planned doubling of RAP feed rates

Modernisation target of the first phase: doubling the RAP feed rate to 40%. ‘The volume of reclaimed asphalt we’ll be able to process with the new mixing plant will depend on how much of it is available from road resurfacing,’ explains PORR’s CEO Karl-Heinz Strauss. Also important is providing proof that the asphalt produced by the upgraded plant meets all standards for metrics such as rutting resistance and bearing capacity. The asphalt must naturally also meet the specifications set out by customers.

A Retrofit solution from Benninghoven

Retrofitting as an alternative to a new build The hot gas generator from Benninghoven is the leading, patented recycling technology and enables operators of asphalt mixing plants to produce asphalt mixtures with RAP feed rates of up to 100% with lower operational emissions. As a Retrofit solution, it can be integrated easily into existing plants, and this fact was also instrumental in PORR’s decision to retrofit its existing plant as the first in Austria. In addition to a high level of experience with Retrofit projects, Benninghoven also offers the complete package: competent advice, innovative technology, perfect implementation and reliable support before, during and after the project phase. Retrofit – it sounds easy, but it is highly complex and entails far more than just replacing old components with new ones. Benninghoven examines and analyses the process as a whole and decides together with the customer which technology will be used where and how.

When it comes to hot gas generator technology, PORR has taken on a truly pioneering role with the Retrofit project. This is the first plant in Austria to be Retrofitted with this innovative technology.

Installation in two project phases

To keep downtime to a minimum, the installation of the components was planned as a two-stage process.

  • First phase in 2022: Retrofitting the cold recycling system
  • Second phase in 2023: Installation of structural steelwork for the key components: the recycling drum, the hot gas generator, and the burner

Hot gas generator technology defines the state-of-the-art in asphalt production with RAP

High RAP feed rates with low emissions can only be achieved by the counterflow principle in the hot gas generator. Here, the RAP material is indirectly heated to the ideal processing temperature of 160 °C and has no contact with the burner flame. With the counterflow principle, the burner fires into the hot gas generator and intensely heats the recirculating air in the recycling drum. This hot air then acts as a gentle and indirect source of heat for the recycled material in the downstream recycling drum, heating it to the final temperature for the RAP material of 160 °C. This capability was the decisive factor for PORR.

Resource- and cost-efficient asphalt production:

  • The asphalt mix may be produced from an up to 100% proportion of RAP
  • Low emission values: Ctot < 50 mg/m³
  • Efficient utilisation of energy in the asphalt mixing plant
  • Maximum flexibility with frequent recipe changeovers

More information on this innovative technology and the future of asphalt production from Steve Mac Nelly, Head of Development & Design Engineering at Benninghoven:

‘We only feed hot gas to the material in the recycling drum, as the bitumen content of the RAP would be burned off if we used a direct flame.’

Steven Mac Nelly, Head of Development & Engineering, Benninghoven

The PORR closed-loop economy strategy

Benninghoven is not the only company focusing on resource-efficiency and reducing emissions. PORR also prioritises the recycling and re-use of materials. The utilisation of hot gas generator technology represents another milestone in the company’s closed-loop economy strategy. ‘We aim to replace primary resources with recycled materials wherever technically possible and economically viable,’ explains PORR CEO Karl-Heinz Strauss. ‘There is definitely demand for recycled construction materials on the market and we keep receiving requests from customers for this.’

‘Technology like this forms an integral part of our strategy for achieving a closed-loop economy.”

Karl-Heinz Strauss, CEO PORR

A sound investment in the future

PORR’s use of hot gas generator technology contributes to the reduction of CO₂ emissions. The use of only 60% RAP in the production of new asphalt mixes can already cut CO₂ emissions in the overall road construction process chain by 20%. At the same time, this reduces asphalt production costs, because recycled material is significantly cheaper than quarried virgin material. As a result, the company has not only derived several positive ecological, economical and flexibility benefits from the Retrofit project, but is now better placed to meet customer requirements. With Benninghoven as a strong partner, the entire process was handled with absolute precision and is now regarded as a flagship project in the Austrian asphalt production sector

Media & Press

Click here to download a ZIP file containing the press release in the available languages in Microsoft Word format and the images in 300 dpi resolution.

Download