New cutting tools for Wirtgen cold recyclers and soil stabilizers

At bauma 2016, Wirtgen is not only presenting the world's biggest range of products for cold recycling and soil stabilization. Along with the machines, the right choice of cutting tools also has a major influence on the quality and cost-efficiency of the application. Wirtgen have further enhanced their comprehensive range of cutting technology products.

No two bases are identical. Sometimes debris or large blocks of stone make it more difficult to stabilize the soil, other times the base course to be rehabilitated is studded with abrasive materials. In other words, not only the reclaimed material and mix can differ significantly, the forces acting on the milling and mixing rotor also vary considerably. Catering to the demands of particularly tough on-site conditions, Wirtgen has launched a completely new and carefully matched combination comprising the new GENERATION Z point-attack cutting tools and the quick-change toolholder system HT22. And what does that mean?

GENERATION Z + HT22: A robust combination with a long tool life

First: Higher impact resistance. For one thing, the reshaped carbide tip of the GENERATION Z point-attack cutting tools has additionally been reinforced and the quality of the carbide material further optimized. This makes the cutting tool less likely to break and more resistant to large blocks of stone and abrasive materials.

Second: Reduced wear. The steel base, wear plate and clamping sleeve have also been modified in detail. This makes all the GENERATION Z components more durable. Since cutting tools with shank diameters of either 22 mm or 25 mm can be used, users can respond precisely to the different requirements encountered.

Third: Greater stability. The quick-change toolholder system HT22 is a completely new development. The system components are extremely robust due to the revised geometrical design of the base and of the upper and lower parts of the toolholder, as well as the enhanced steel quality. The hammer head of the redesigned base ensures additional protection against wear.

The direct result for the user is a longer service life of the cutters and the quick-change toolholder system. Due to the resultant advantages – fewer tool changes, fewer and shorter machine downtimes, longer service intervals and higher machine availability – soil can still be stabilized cost-effectively no matter how difficult the conditions may be, and even severely damaged road pavements can be recycled efficiently.

Available for all wheeled Wirtgen recyclers and tractor-towed stabilizers

The system as a whole has demonstrated its reliability in exhaustive test runs and more than 15,000 operating hours in a variety of applications. GENERATION Z + HT22 are available for all wheeled cold recyclers and soil stabilizers in the WR series as well as tractor-towed stabilizers in the WS series – from the WR 200i, WR 240i and WR 250 to the tractor-towed stabilizers WS 220 and WS 250.

Download

Please download the ZIP-archive with the press release as WORD-file and the photos in 300 dpi in your relevant language.

Download
WIRTGEN GROUP

Public Relations
Reinhard-Wirtgen-Straße 2
53578 Windhagen
Germany