BENNINGHOVEN | REVOC system: Catalyst system for asphalt mixing plants
Patented REVOC system increases sustainability in the asphalt industry and secures the future of plant sites. The REVOC system has been nominated for the 2022 bauma Innovation Award in the “Climate Protection” category ...
World premiere of the KMA 240(i) cold mixing plant
Cold recycling technologies from Wirtgen are in use around the globe for climate-friendly and cost-effective recycling of construction materials. The new KMA 240(i) mobile cold mixing plant now makes in situ production of high-quality mixes even more efficient.
VÖGELE to present a new generation of road pavers at Bauma 2022
Bauma 2022 will be the world premiere for VÖGELE’s first road pavers and screeds of the new Dash 5 generation: the SUPER 1900-5(i) and SUPER 2100-5(i) Highway Class pavers and the latest-generation AB 500 and AB 600 Extending Screeds.
BENNINGHOVEN | Sustainability in asphalt production
Working more efficiently with sustainable and economical technologies is the challenge of today and tomorrow. Solutions from Benninghoven lower emissions and secure the future of asphalt mixing plant sites.
The VÖGELE product portfolio of road pavers enables users to cover practically any application in asphalt paving. The range of screeds is correspondingly broad, covering twelve models in up to five different compaction variants.
VÖGELE to present new Classic Line pavers at Bauma 2022
The road paver manufacturer will be introducing two new machines with pave widths of between 0.75 and 5 m at the Bauma trade fair in Munich: the compact SUPER 1300 tracked paver and the SUPER 1303 wheeled model.
The Wirtgen Group at Bauma 2022 – Focus on sustainable road construction
At this year’s Bauma, the Wirtgen Group is presenting solutions for the entire road construction process chain. The motto for this year’s event is: ‘The Future in Roadbuilding – Smart. Safe. Sustainable.’
The jaw crusher MOBICAT MC 110(i) EVO2 and the cone crusher MOBICONE MCO 90(i) EVO2, with their efficient crusher direct drive, have a holistic drive concept that forms the basis for high cost-effectiveness.
Wirtgen Group presents sustainable road construction solutions at WoA 2022
With a total of 11 exhibits from Wirtgen, Vögele, Hamm, Kleemann and John Deere, the specialist audience at World of Asphalt was shown a cross-section of market-oriented and holistic solutions for the entire road construction process chain. The focus at the show was set on the critical issues of cost-effectiveness and sustainability.
VÖGELE presents powerful pavers in all sizes at the trade fair
At the World of Asphalt 2022, VÖGELE presents an attractive cross section of its current product program: From the smallest road paver, the SUPER 700i, through the SUPER 1800-3i SprayJet spray paver up to the SUPER 2000-3i 10 ft paver.
Smart road construction in the widest tunnel in Switzerland
Optimum coordination and maximum efficiency were required for paving a width of 11.5 m in the Gubrist tunnel, which was why the contractor put its money on VÖGELE’s WITOS Paving Plus process optimisation solution.
HP series from HAMM – new pneumatic-tyre rollers are performing impressively
The pneumatic-tyre rollers from the HP series have been on the market across the world for several months and are showing what they can do in practice. This is a completely new generation of pneumatic-tyre rollers, which have been a permanent feature of HAMM's product range since the 1960s.
SPECTIVE CONNECT - the smartest form of plant control
The innovative digital operating concept SPECTIVE from Kleemann has optimised the control options of crushing plants in a trendsetting manner. With the SPECTIVE CONNECT extension, Kleemann goes one step further.
Mobile screening plants in a large-scale operation in India
India has vast reserves of iron ore and is the second biggest steel producer in the world. The mobile screening plants MOBISCREEN EVO from Kleemann are used during the extraction of the important material.
BENNINGHOVEN BA RPP 4000 meets requirement for maximum recycling
When high recycling ratios have to be met while complying with low emission rates, there is practically no way around the BENNINGHOVEN hot-gas generator technology. This allows the owner to turn 100 % reclaimed asphalt into new asphaltic mixtures while complying with the new German TA Luft standard.
TBA 3000 produces special mixtures for Formula 1 track in Sochi
Formula 1 race tracks are one of the greatest challenges for installation teams and machinery. The Russian building contractor Tekhalyans already used Benninghoven technology during the initial construction of the SOCHI AUTODROM.
After a comprehensive environmental management system was built, HAMM AG was certified according to ISO 14001. This will help the company to continue to improve its environmental performance in the future.
With the HD 14i TT, HAMM is presenting a new compact pneumatic-tyre roller that impresses with its high compaction power and optimum visibility, and complies with the exhaust emission standard EU Stage V/EPA Tier 4.
Representatives from contractor Matthäi Bauunternehmen GmbH & Co. KG and construction machinery leasing company MILEX Rent GmbH have taken delivery of the world’s first new PowerFeeders from JOSEPH VÖGELE AG.
In order to receive a constant high material volume from a cone crusher with high final product quality, mobile cone crushing plants should be operated in the optimum range. This starts with the selection and composition of the correct tool, which consists of cone and bowl liner.
The SUPER 2000-3i and SUPER 2003-3i 10-foot pavers were designed primarily for highways and large-scale projects where performance and productivity are key. Both pavers come with VÖGELE’s user-friendly ErgoPlus 3 operating system.
Intelligent paver management: At Conexpo 2020, JOSEPH VÖGELE AG will be showcasing its new software-based application for road construction. WITOS Paving Docu allows paving data and delivery notes to be recorded and automates the process of sending out job-site reports.
The 8-foot paver segment is critical to a lot of road construction companies, because these machines cover a very wide range of applications, from small municipal jobs to major highway construction and rehabilitation.
Conexpo-Con/Agg 2020: New Large Milling Machines the Highlight of the Wirtgen Group’s Solutions
More than 30 exhibits, including 10 world and North American premieres and Wirtgen’s new large milling machines leading the pack – this year, the Wirtgen Group is exhibiting outdoors (Silver Lot 1) at booth S 5419.
With a potentially record-breaking pave width of up to 18m, the new SUPER 3000-3(i) can pave the surface course of a four-lane motorway carriageway without joints. As a representative of the Premium Line, the large paver additionally incorporates all the features of the latest "Dash 3" generation. Other highlights include the innovative material transport and the new hydraulic tamper-stroke adjustment.
Wirtgen Group Booth at Bauma 2019 Draws Record Number of Visitors
A total of 120 exhibits, including 18 world premieres and 25 innovations as well as six interactive technology demos: the Wirtgen Group’s booth at Bauma was packed with leading machine and application technologies from Wirtgen, Vögele, Hamm, Kleemann, Benninghoven, and John Deere.
The SUPER 1000(i) and the SUPER 1003(i) represent the global market leader's recently introduced Classic Line. Equipped with the ErgoBasic operating concept, the two compact pavers boast simple handling and excellent value for money.
VÖGELE present smart solution for digital job-site documentation
WITOS Paving Docu allows paving data and delivery notes to be recorded and automates the sending of job site reports. It is a practical, easy-to-use solution for small and medium-sized construction projects.
Millimeter accuracy is paramount on a track where every thousandth of a second counts, which is why, when it was time to rehabilitate the pavement, the client took the opportunity to re-profile the track, too.
On an area extending over more than 600 m², the Group will be showcasing a representative cross-section of its application-oriented products for the African market on the outdoor grounds (exhibition area T3.115) of bauma Conexpo Africa.
Wirtgen Group showcases two Introductions at World of Concrete 2017
With a display of its innovative solutions for concrete road construction, the Wirtgen Group is presenting three slipform pavers and a texture curing machine from Wirtgen and a mobile Kleemann crusher at this year's World of Concrete trade fair in Las Vegas (indoor booth no. C 6126).
The Wirtgen Group, with its product brands Wirtgen, Vögele, Hamm and Kleemann, will be showcasing leading technologies for the entire road construction process chain at Excon 2017. Wirtgen’s milling machines W 195, W 120 R and slipform paver SP 62 will be celebrating their trade fair debut in India.
Innovation. Performance. Partners. Close to our customers – Wirtgen Group at Conexpo 2017
Over 40 products – many of them new to North America – will demonstrate Wirtgen Group product performance, innovation and dedication to customers at stand No. C 31239 at Conexpo-Con/Agg 2017 in Las Vegas.
Cutting the red ribbon, Managing Director Pok Sum Loong, YBhg Dato’ Sri Zohari Haji Akob, the Secretary General of the Ministry of Works of Malaysia, and Stefan Wirtgen officially opened the new subsidiary Wirtgen Malaysia.
Wirtgen exhibits its complete new generation of small milling machines at bauma 2016
Right in time for bauma, the W 120 Ri small milling machine celebrates its world premiere. This rear-loader rounds out Wirtgen's new generation of small milling machines. The complete line now includes no fewer than 16 machines with milling widths from 350 to 1,300 mm.
he new visual orientation symbolizes the strength of the corporate affiliation, which has developed over the course of many years, and stands, above all, for one thing: The brands' joint focus on the needs of customers.
Since early this year, machines supplied by the Wirtgen Group have been stabilizing the entire site. These include two Wirtgen tractor-towed soil stabilizers WS 250, a Hamm H 20i compactor and a Streumaster binding agent spreader SW 16 TC.
By supplying the 3800 CR as a rear loader, Wirtgen offers an efficient and flexible solution for in-situ cold recycling. However as a front loader the 3800 CR also excels as a high-performance cold milling machine.
Recycling in the megacity environmental protection in São Paulo
Recycling in the megacity environmental protection in São Paulo: The Avenida Sapopemba is the busiest road in São Paulo and one of the country’s main traffic routes. It has now been rehabilitated, making economical use of resources. In operation: the KMA 220.