Mobile coarse screening plant MS 15 Z

MS 15 Z Mobile coarse screening plant

Diesel-hydraulic

25 in x 16 in x 9 in

441

US t/hr

Properties

Extremely robust mobile double-deck screening plant with an output of up to 400 t/h, suitable for feed material with an edge length of up to 400 mm. The plant is equally well suited to use in natural stone, as well as in recycling.

  • Mobile double-deck screening unit
  • Diesel-hydraulic drive
  • Coarse screening plant
  • Maximum feed size 400 mm
Show less

Scalping screens

Good preparation before the crushing process

Scalping screens are designed such that they can sort material even before the first crushing stage. For this purpose, different screening plant versions are available with different screen casing sizes as double-deck screening plants.

Depending on the plant, feed material can have a feed size of up to 500 mm. Thanks to their compact dimensions, the plants are easy to relocate and transport.

Recommended use

Scalping screen for screening all stone types and residual construction materials > double-screen for classifying up to 3 fractions

Extensive range of coarse screen surfaces

Feed capacity of 200 t/h up to 500 t/h

Screen surfaces

The matching screen surfaces for optimum results

During the daily routine, screen surfaces are really put to the test. To guarantee long-term, reliable screening to the desired final grain size, the screen surfaces from KLEEMANN are made of particularly wear-resistant spring wire steel or round wire.

Thanks to the double-anchoring at the crossings, they have a high mesh stability for uniform screening. The screening result itself is determined by numerous factors. The most important influence factors include the grain shape, the humidity content and the feed volume.

External power supply

(Dual Power Option)

Electricity is often cheaper than diesel. Added to this are ecological, legal or social provisions that often restrict the use of diesel.

The screening plants are equipped with a Dual Power System with two electric motors each with 37 kW (50 PS) for high work output combined with low fuel consumption. Connection is made via an electrical device. This permits a quick switch between two power sources (diesel engine or external power supply). Users thus remain flexible and the pollutant emission is reduced.

Technical specifications

Max. feed size
Feed height
Hopper volume
Max. feed size
25 in x 16 in x 9 in
Feed height
11 ft 9 in
Hopper volume
10.5 yd³
Length
Width x length
Length
11 ft 6 in
Width x length
47 in x 11 ft 6 in
Width x length
Length
Type (optional)
Width x length
55 in x 14 ft 9 in
Length
14 ft 9 in
Type (optional)
Variable speed
Type (optional)
Type (optional)
Variable speed
Width x length
Width x length
47 in x 14 ft 9 in
Discharge height approx.
Width x length
Discharge height approx.
11 ft x 0 in
Width x length
35 in x 24 ft 11 in
Discharge height approx.
Width x length
Discharge height approx.
11 ft 10 in
Width x length
55 in x 18 ft 1 in
Type
Upper deck (W x L)
Lower deck (W x L)
Type
Double-deck screen machine
Upper deck (W x L)
60 in x 16 ft x 0 in
Lower deck (W x L)
60 in x 15 ft x 0 in
Drive concept
Power supply unit output
Drive concept
Diesel-hydraulic
Power supply unit output
127 hp - 131 hp
Transport height approx. (standard value)
Transport length approx.
Transport width approx.
Transport weight of basic plant
Transport height approx. (standard value)
11 ft 2 in
Transport length approx.
50 ft 4 in
Transport width approx.
9 ft 6 in
Transport weight of basic plant
72,150 lbs

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.