Mobile jaw crusher MC 140 Z

MC 140 Z Mobile jaw crusher

827

US t/hr

1,400 mm x 1,130 mm

Properties

The MC 140 Z specializes in high annual mining capacities and large feed sizes. This is helped by the solid double-deck prescreen, which is over three meters long, as well as the powerful diesel engine. The single toggle jaw crusher with its weight of over 50 tons can process feed sizes of up to 1300 x 1000 mm edge length and depending on the feed material reaches capacities of up to 750 t/h.

  • Frequency-controlled vibrating feeder
  • Independently vibrating double-deck prescreen
  • Possibility for external power supply (option)
  • Diesel-electric drive concept
Show less

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Innovative diesel-electric drive concept - impressive performance with the best possible consumption values

The crushing plants are equipped with efficient, powerful diesel-electric drives. They ensure environmentally friendly operation combined with low fuel consumption.

Efficient and powerful diesel-electric drive (A) for low fuel consumption (crusher and all conveyor belts are driven electrically)

External power supply (B) for even more economic application in quarries

Find out more
Tolles Produkt

Effective prescreening - better results and less wear

For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.

Find out more
Tolles Produkt

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Find out more

Technical specifications

Max. feed size
Feed height
Feed height feet
Feed height inches
Feed height with extension
Feed height with extension feet
Feed height with extension inches
Hopper width with extension
Hopper width with extension feet
Hopper width with extension inches
Hopper length with extension
Hopper length with extension feet
Hopper length with extension inches
Hopper volume
Hopper volume with extension
Max. feed size
31 in x 50 in x 30 in
Feed height
21 ft 4 in
Feed height feet
21 ft
Feed height inches
4 in
Feed height with extension
27 ft 9 in
Feed height with extension feet
27 ft
Feed height with extension inches
9 in
Hopper width with extension
18 ft 5 in
Hopper width with extension feet
18 ft
Hopper width with extension inches
5 in
Hopper length with extension
18 ft 10 in
Hopper length with extension feet
18 ft
Hopper length with extension inches
10 in
Hopper volume
15.7 yd³
Hopper volume with extension
45.8 yd³
Width
Length
Length feet
Length inches
Width
40 in
Length
13 ft 2 in
Length feet
13 ft
Length inches
2 in
Discharge height
Discharge height feet
Discharge height inches
Width
Length
Length feet
Length inches
Discharge height
13 ft 2 in
Discharge height feet
13 ft
Discharge height inches
2 in
Width
40 in
Length
26 ft 3 in
Length feet
26 ft
Length inches
3 in
Crusher drive type
Crusher inlet (W x D)
Crusher weight (approx.)
Single toggle jaw crusher type
Crusher drive type
electric
Crusher inlet (W x D)
1,400 mm x 1,130 mm
Crusher weight (approx.)
119,000 lbs
Single toggle jaw crusher type
STR140-103
Drive concept
Performance LRC (1500 rpm)
Performance Tier 3/Stage IIIA (1500 rpm)
Drive concept
Diesel-electric drive
Performance LRC (1500 rpm)
587 hp
Performance Tier 3/Stage IIIA (1500 rpm)
587 hp
Transport weight of basic plant
Transport weight of basic plant
352,740 lbs

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.