Mobile jaw crusher MC 125 Z

MC 125 Z Mobile jaw crusher

717

US t/hr

1250 mm x 1000 mm

Properties

Primary crusher designed specially for the requirements in quarries thanks to its design, drive concept, and capacity. The SStR 1250 x 1000 jaw crusher weighs as much as 49 tons, is equipped with an especially long crushing jaw, and has a drive power of 200 kW. During operation the 540 kVA generator generates enough energy to drive other external consumers such as vibrating screens, lighting, or even also mobile belt conveyors.

  • Frequency-controlled vibrating feeder
  • Diesel-electric drive concept
  • Possibility for external power supply (option)
  • Independently vibrating double-deck prescreen
Weniger anzeigen

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values

The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time.

An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher.

All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

Find out more
Tolles Produkt

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Find out more
KLEEMANN|1773|2670
KLEEMANN|1774|2671
KLEEMANN|2015|2997
News & Job reports

In a quarry in Ubonratchathani, Thailand, a plant train consisting of an MC 125 Z, MCO 13, MCO 11 S and MS 20 D crushes basalt for road construction.

Job Report

The mobile jaw crusher is equipped with a special wobbler feeder for prescreening to permit thorough screening of cohesive feed material.

Job Report

Thanks to the mobile combination of plants from KLEEMANN, up to 600 tons of iron ore are processed per hour in the "Ridges Iron Ore Project" in the Kimberley region.

Job Report
Continue reading
Downloads
Italian (IT) (342.0 kB)English (GB) (172.4 kB)German (DE) (173.1 kB)Chinese (CN) (264.1 kB)
English (US) (2.3 MB) Portuguese (BR) (2.3 MB)English (GB) (2.3 MB)German (DE) (2.3 MB)French (FR) (2.3 MB)Spanish (ES) (2.3 MB)Italian (IT) (2.3 MB)Russian (RU) (252.9 kB)Chinese (CN) (2.4 MB)

Technical specifications

Feed size
Feed height
Feed height with extension
Hopper width with extension
Hopper length with extension
Hopper volume
Hopper volume with extension
Feed size
28 in x 44 in
Feed height
18 ft 9 in
Feed height with extension
23 ft 7 in
Hopper width with extension
17 ft 11 in
Hopper length with extension
16 ft 7 in
Hopper volume
13.1 yd³
Hopper volume with extension
39.2 yd³
Width
Length
Width
48 in
Length
11 ft 6 in
Discharge height
Width
Length
Discharge height
12 ft 10 in
Width
39 in
Length
26 ft 3 in
Crusher drive type
Crusher inlet (W x D)
Single toggle jaw crusher type
Crusher drive type
electric
Crusher inlet (W x D)
1250 mm x 1000 mm
Single toggle jaw crusher type
STR115-100
Drive concept
Performance LRC (1500 rpm)
Performance Tier 3/Stage IIIA (1500 rpm)
Drive concept
Diesel-electric drive
Performance LRC (1500 rpm)
488 hp
Performance Tier 3/Stage IIIA (1500 rpm)
488 hp
Please feel free to contact us!

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.