Asphalt types can be stored (simultaneously)
Fuels possible (up to)
Hot bin section
Mixed material loading silo capacity
BENNINGHOVEN plants discontinuously mix the precisely weighed components (mineral, bitumen, filler) of the asphalt mixture in batches as per the recipe in an asphalt mixer.
With the BENNINGHOVEN cold recycling feed systems, up to 40% recycling material can be added to the mixing plant. For this, the recycling material is added cold and directly into the mixer. Even small quantities from 2 t can be covered with these technologies. In combination with a hot feed system, this creates the required flexibility.
Continuously rising energy costs and careful use of limited resources require innovative technologies and continuous further development. The burner type EVO JET was developed by the BENNINGHOVEN research team in practical application.
The BENNINGHOVEN control system optimises and controls your production processes and generates all parameters you need for monitoring your operating costs. Project-related re-calculations can be implemented easily. Decades of experience and collaboration with users have created a perfect platform for a user-friendly system.
Rising operating costs required innovative solutions: Decades of experience, research and development in bitumen storage have resulted in the design of storage tanks and the associated equipment. Maximum operating reliability, low operating costs and minimum energy consumption are the targets achieved by this development.
|Screening (x-fold)||Screen output (0–4 mm)||Total screen area|
|4||200 t/h||20.2 m²|
|5||220 t/h||23.2 m²|
All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon the actual plant configuration and individual, site-related conditions that influence the processing technology.