Cold recycler and soil stabilizer WR 200i

WR 200i Cold recycler and soil stabilizer

2000 mm

500

mm

EU Stage 4/US EPA Tier 4f

The compact recycler with a diverse application range

  • The compact recycler of the WR series is ideal for working in locations where space is limited.
  • With a working width of 2.00 m and a maximum working depth of 500 mm, it is suitable for a diversity of operations in soil stabilising and cold recycling.
  • Its compact dimensions and the optimized weight of the machine enable flexible transportation with simpler approval procedures.
  • When it comes to soil stabilising, the ideal performance range is between 1,000 and 5,000 square metres a day.
  • For cold recycling, the ideal performance range is between 400 and 800 square metres per hour and 10 to 15 cm of asphalt thickness.
Show less
Highlights
Wide range of applications
Automated features for efficient operation
Precise metering systems for binder addition
Efficient engine and diagnostic systems
Perfect visibility concept and comprehensive camera system
Perfection in ergonomic design and handling
Outstanding all-terrain mobility
High milling and mixing performance
Steering system tailored to field requirements

Soil stabilisation with WR model series

Soil stabilization scores top marks in comparison to soil exchange as it requires fewer truck transports, results in shorter construction times, saves resources and reduces CO2 emissions. When operating as a soil stabilizer, the WR uses its powerful milling and mixing rotor to mix pre-spread binders, such as lime or cement, into the existing, insufficiently stable soil at working depths of up to 560 mm to convert it into a construction material of high quality in an in-situ process. The resulting homogeneous soil-binder mixture offers high tensile strength, compressive strength and shear strength values as well as long-term water resistance, frost resistance and volume stability.

Learn more

Cold recycling with WR model series

The WR is equipped with a powerful milling and mixing rotor and state-of-the-art injection systems. The cold recycler mills and granulates the existing asphalt pavement, injects binders and water in precisely metered quantities and mixes all three in a single operation. The new base layers produced in this in-situ process are distinctive for their exceptionally high bearing capacity.

Learn more

Mixing procedures

Cold recycling can be achieved either in-plant by hauling material recovered from an existing road to a central depot where it is fed through a mixing unit, or in-place using a recycling machine.

When mixing in-place / in-situ, a cold recycler granulates the existing pavement while mixing in binders and water homogeneously at the same time.

When mixing in-plant, reclaimed asphalt pavement and crushed stone are transported to a mixing plant located in the vicinity of the construction site.

Learn more

WIRTGEN cutting technology

Results of high quality are the main goal of every construction project. This applies to road rehabilitation using cold milling machines and cold recyclers as well as to soil stabilization and the extraction of useful minerals using surface miners. Optimum interaction between the milling drum, toolholder and pick is essential for precise, efficient paving removal.

WIRTGEN is a market leader in cutting technology and offers customers perfectly matched, high-performance cutting systems. WIRTGEN is also constantly developing its cutting technology components further. Such further developments are largely based on practical experience and feedback from our customers.

Learn more

Control technology

WIRTGEN machines are fitted with a machine control system of the highest quality, in which the large proportion of software developed in-house plays the decisive role. WIRTGEN puts a special focus on continuous improvement, which has the added effect of significantly increasing the operational reliability of the machines. In addition, many years of experience in software and hardware development allow for higher and more flexible machine functionality in terms of applications and meeting specific customer requirements.

Learn more

Technical specifications

Working width
Working depth
Lateral inclination, max.
Ground clearance
Exhaust emissions category
Maximum power
Displacement
Operating and travel speed
Operating weight, CE
Working width
2000 mm
Working depth
500 mm
Lateral inclination, max.
8 °
Ground clearance
400 mm
Exhaust emissions category
EU Stage 4/US EPA Tier 4f
Maximum power
320 kW / 435 HP
Displacement
10.7 l
Operating and travel speed
0 - 210 m / min (12,6 km / h)
Operating weight, CE
24,500 kg

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.