PowerFeeder MT 3000-3 Offset

MT 3000-3 Offset PowerFeeder

1,200

t/h

24,185

kg

3

m

State-of-the-art high-performance feed technology with outstanding operating convenience and a wide range of applications

The new MT 3000-3 Offset PowerFeeder combines state-of-the-art, high-performance feed technology with outstanding operating convenience. The optimized conveying concept ensures reliable uninterrupted and jolt-free transfer of mix to the paver. The pivoting and height-adjustable conveyor of the MT 3000-3 Offset creates a wide variety of applications, ensuring a high level of usage. The ErgoPlus 3 operating concept is another step forward in making operation much easier. It also incorporates a new service and maintenance concept with optimized access to all cleaning and maintenance points.

Show less
The highlights of the MT 3000-3 Offset
Optimized belt heating
Optimized conveying of mix
Modern drive concept
New maintenance and service concept
AutoSet Plus
Redesigned material hopper
ErgoPlus 3
Pavedock Assistant
Tolles Produkt

Material handling concept

The powerful conveying concept of the MT 3000-3i can transport up to 1,200 t mix an hour, meaning that a 25 t mix truck can be emptied completely in just 60 seconds. The continuous supply of mix increases paving quality and ensures non-stop paving. Construction projects are completed more quickly and more economically.

More
Tolles Produkt

ErgoPlus 3

The ErgoPlus 3 operating concept makes people the focus. It makes the machine simple and intuitive to operate. At the same time, ErgoPlus 3 provides the feeder operator with a more ergonomic, safer workplace, giving him full control of the machine and the construction project at all times.

More
Tolles Produkt

PaveDock Assistant

PaveDock Assistant enables material feeder operators and truck drivers to communicate unambiguously without hooting or hand signals. This makes it particularly quick and safe to dock, tip and drive away trucks. Signal lights on the roof of the material feeder and the associated controls on the feeder operator’s ErgoPlus 3 console are key components of the system.

More
Tolles Produkt

AutoSet Plus

AutoSet Plus facilitates repositioning. The material feeder can be put into repositioning or transport position at the touch of a button. Conveying programmes can furthermore be saved and called up again at any time. AutoSet Plus thus automates routine tasks, enabling operating processes to be completed more quickly and in a more controlled manner.

More

Technical specifications

Exhaust emissions standard
Version
Manufacturer
Fuel tank
ECO mode output
Nominal output
Type
Exhaust emissions standard
European exhaust emissions standard 3a, US standard EPA Tier 3
Version
liquid-cooled 6-cylinder diesel engine
Manufacturer
Deutz
Fuel tank
450 l
ECO mode output
139 kW / 1,800 U/min
Nominal output
142 kW / 2,000 U/min
Type
TCD 2012 L6
Speeds
Operating speed (up to)
Travel speed (up to)
Version
Ground contact
Traction drive crawler tracks
Lubrication of track rollers
Track tension adjuster
Operating speed (up to)
24 m/min
Travel speed (up to)
4.5 km/h
Version
provided with rubber pads
Ground contact
3,060 mm x 305 mm
Traction drive crawler tracks
separate hydraulic drives with electronic control
Lubrication of track rollers
lifetime
Track tension adjuster
spring assembly
Push-rollers
Version
Hopper capacity of material feeder
Width of material feeder
Feed height of material feeder
Positions of material feeder
Version
oscillating
Hopper capacity of material feeder
15 t
Width of material feeder
3,680 mm
Feed height of material feeder
600 mm
Positions of material feeder
can be adjusted in a forward direction by 75 mm or 150 mm
Conveyors
Conveyor drive
Version
Belt width
Screed heating
Pivoting angle
Offset feeding from the side
Transfer height (up to)
Augers
Auger drive
Auger speed
Auger diameter
Conveying system capacity (up to)
Augers
Pivoting conveyor
Conveyor drive
separate hydraulic drives
Version
2 continuous rubber conveyor belts
Belt width
1,100 mm
Screed heating
infrared heating panel, diesel-operated
Pivoting angle
55 °
Offset feeding from the side
3.5 m
Transfer height (up to)
3.9 m
Auger drive
separate hydraulic drives
Auger speed
100 U/min
Auger diameter
300 mm
Conveying system capacity (up to)
1,200 t/h
Augers
2, in material hopper
Pivoting conveyor
hydraulically pivoting
Capacity
Capacity, 2.5 m machine
Capacity, 3 m machine
Passive homogenization promoted by use of additional hopper
Capacity, 2.5 m machine
20 t
Capacity, 3 m machine
25 t
Passive homogenization promoted by use of additional hopper
18 t
Weight
Length in transport position
With pivoting conveyor
With pivoting conveyor and funnel
Track gauge
Transport width
Weight
24,185 kg
With pivoting conveyor
14.49 m
With pivoting conveyor and funnel
15.02 m
Track gauge
2.36 m
Transport width
3 m

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.