Mobile jaw crusher MC 120i PRO

MC 120i PRO Mobile jaw crusher

Diesel-electric

1,080 mm x 680 mm x 410 mm

650

t/h

Properties

The MOBICAT MC 120i PRO, the first jaw crusher of the PRO Line, is used for pre-crushing of almost all natural stone. The jaw crusher is extremely robust and impresses with its low-maintenance operation. The machine therefore guarantees high production outputs.

  • Extremely robust design
  • Very high production output with low-maintenance operation
  • Crusher unblocking system via frequency converter (optional)
  • External power supply (optional)
  • Optimal combination with downstream cone crusher MOBICONE MCO 11i PRO
  • Optional crusher discharge conveyor
Show less
Highlights

The jaw crusher MOBICAT MC 120 PRO is extremely robust and impresses with its low-maintenance operation. The machine therefore guarantees high production outputs.

Feeding unit
Prescreening
Continuous Feed System (CFS)
Rock chisel
Drive
Control system
Crusher discharge conveyor and magnet
Accessibility and safety
Transport
Crusher unit
Gap setting
Crusher unblocking system
Load reduction system (LRS)
Tolles Produkt

Intuitive control concept SPECTIVE - for simple operation

The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the ground.

SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localisation, the description and remedy tips result in reduced downtimes. The 12" touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen or gloves.

Find out more

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilisation is optimised. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Everything at a glance with WITOS®

The WITOS FleetView telematic system provides support for efficient fleet and service management. It provides information on the operating status of the machine independently of the location and time. Even users with only one machine benefit from WITOS.

From support for maintenance and diagnostic processes to the targeted control of the machines: the range of services is diversified and it is an ideal supplement to the WIRTGEN GROUP Smart Service agreements.

Find out more

Innovative diesel-electric drive concept - impressive performance with the best possible consumption values

The crushing plants are equipped with efficient, powerful diesel-electric drives. They ensure environmentally friendly operation combined with low fuel consumption.

Efficient and powerful diesel-electric drive (A) for low fuel consumption (crusher and all conveyor belts are driven electrically)

External power supply (B) for even more economic application in quarries

Find out more
Tolles Produkt

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Find out more

Technical specifications

Max. feed size
Feeding height
Feed height with extension
Feed capacity up to approx.
Hopper width
Hopper width with extension
Hopper length
Hopper length with extension
Hopper volume
Hopper volume with extension
Max. feed size
1,080 mm x 680 mm x 410 mm
Feeding height
4,930 mm
Feed height with extension
5,280 mm
Feed capacity up to approx.
650 t/h
Hopper width
2,850 mm
Hopper width with extension
3,900 mm
Hopper length
4,100 mm
Hopper length with extension
3,910 mm
Hopper volume
9.7 m³
Hopper volume with extension
13 m³
Width x length
Width x length
1,110 mm x 3,600 mm
Width x length
Model
Width x length
1,200 mm x 2,900 mm
Model
Triple-deck heavy-piece screen
Discharge height
Width
Length
Discharge height
3,450 mm
Width
650 mm
Length
6,650 mm
Crusher drive type
Crusher inlet (W x D)
Crusher weight (approx.)
Crushing power
Single toggle jaw crusher model
Gap setting
Adjustment range of gap width
Crusher drive type
Electric
Crusher inlet (W x D)
1,200 mm x 800 mm
Crusher weight (approx.)
29,200 kg
Crushing power
200 kW
Single toggle jaw crusher model
STR120
Gap setting
Fully hydraulic
Adjustment range of gap width
70 mm - 200 mm
Crushing capacity CSS = 100 mm up to approx.
Crushing capacity CSS = 130 mm up to approx.
Crushing capacity CSS = 160 mm up to approx.
Crushing capacity CSS = 100 mm up to approx.
250 t/h
Crushing capacity CSS = 130 mm up to approx.
325 t/h
Crushing capacity CSS = 160 mm up to approx.
400 t/h
Discharge height approx.
Discharge height, extended approx.
Width
Length
Length, extended
Discharge height approx.
4,000 mm
Discharge height, extended approx.
4,550 mm
Width
1,200 mm
Length
12,300 mm
Length, extended
13,900 mm
Width x length
Width x length
1,300 mm x 2,000 mm
Drive concept
Generator
Power supply unit output
Rated speed
Drive concept
Diesel-electric
Generator
500 kVA
Power supply unit output
368 kW
Rated speed
1,800 U/min
Transport height approx. (default value)
Transport length approx.
Transport width approx.
Transport weight of basic plant approx.
Transport weight max. configuration approx.
Transport height approx. (default value)
4,100 mm
Transport length approx.
19,355 mm
Transport width approx.
3,000 mm
Transport weight of basic plant approx.
72,500 kg
Transport weight max. configuration approx.
85,500 kg

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.