Mobile jaw crusher MC 110 Z EVO

MC 110 Z EVO Mobile jaw crusher

300

t/h

1100 mm x 700 mm

Properties

The MOBICAT MC 110 Z EVO features an independent double-decker prescreen that efficiently removes fine pieces in the feed material. Whether used individually or linked with an MCO 9 EVO cone crusher or MOBISCREEN MS EVO screening plant, this machine is sure to impress.

  • Continuous Feed System (CFS) for optimum crusher loading
  • Innovative crusher unblocking system for extremely short downtimes
  • Independently vibrating double‐deck prescreen
  • Efficient and powerful diesel direct drive
Show less
Highlights

Diverse applications, simple transportation, short setup times, high machine availability: the mobile jaw crusher MOBICAT EVO.

Feeding unit
Side discharge conveyor
Prescreening
CFS (Continuous Feed System)
Crusher unit
Crusher gap setting
Crusher unblocking system
Drive
Control system
Magnet and crusher discharge conveyor
Transport
Linkage

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilisation is optimised. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Tolles Produkt

Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values

The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time.

An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher.

All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

Find out more
Tolles Produkt

Effective prescreening - better results and less wear

For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.

Find out more
Tolles Produkt

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Find out more

Technical specifications

Feed size
Feeding height
Feed height with extension
Feed capacity up to approx.
Hopper width
Hopper width with extension
Hopper length
Hopper length with extension
Hopper volume
Hopper volume with extension
Feed size
990 mm x 990 mm
Feeding height
3,600 mm
Feed height with extension
4,160 mm
Feed capacity up to approx.
300 t/h
Hopper width
1,900 mm
Hopper width with extension
3,200 mm
Hopper length
3,200 mm
Hopper length with extension
3,600 mm
Hopper volume
3.66 m³
Hopper volume with extension
8.4 m³
Width
Length
Width
900 mm
Length
3,680 mm
Width
Length
Model
Width
1,000 mm
Length
1,830 mm
Model
Triple-deck heavy-piece screen
Discharge height
Discharge height, extended
Width
Length
Length, extended
Discharge height
2,190 mm
Discharge height, extended
3,080 mm
Width
500 mm
Length
2,700 mm
Length, extended
5,000 mm
Crusher drive type
Crusher inlet (W x D)
Crusher weight (approx.)
Crushing power
Single toggle jaw crusher model
Gap setting
Gap width max.
Gap width min.
Crusher drive type
Direct
Crusher inlet (W x D)
1100 mm x 700 mm
Crusher weight (approx.)
17,000 kg
Crushing power
160 kW
Single toggle jaw crusher model
STR110-070
Gap setting
Hydraulically adjustable
Gap width max.
180 mm
Gap width min.
30 mm
Discharge height approx.
Discharge height, extended approx.
Crusher discharge conveyor width
Crusher discharge conveyor width, extended
Crusher discharge conveyor length
Crusher discharge conveyor length, extended
Discharge height approx.
3,270 mm
Discharge height, extended approx.
3,880 mm
Crusher discharge conveyor width
1,000 mm
Crusher discharge conveyor width, extended
1,000 mm
Crusher discharge conveyor length
9,200 mm
Crusher discharge conveyor length, extended
10,700 mm
Drive concept
Generator (1500 rpm)
Output LRC (1500 rpm)
Output Tier 3 / Stage IIIA (1500 rpm)
Drive concept
Diesel-electric direct drive
Generator (1500 rpm)
135 kVA
Output LRC (1500 rpm)
248 kW
Output Tier 3 / Stage IIIA (1500 rpm)
248 kW
Transport width max.
Transport length approx.
Transport width max.
3,000 mm
Transport length approx.
14,970 mm

All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions.