HAMM has designed the new pneumatic-tire roller primarily for the chipseal process. With five wheels on the front axle and four wheels on the rear axle, it meets the requirements of the relevant tenders. The working width is 68" (1725 mm). The generous overlapping of the tire tracks ensures homogeneous compaction. The roller is driven by a 55.4 kW Deutz engine in accordance with EPA Tier 4.
Three ballast variants
To match the application, the HP 100i is offered with 13,227 lbs (6 t), 17,637 lbs (8 t) or 22,046 lbs (10 t) operating weights. The ballast kits for adjusting the weight are designed in such a way that individual modules can be attached or detached as required. Furthermore, the 185 gal (700 l) capacity water tank can be used for the ballasting. As an option, the roller can also be equipped with a water-sprinkling system as well as scrapers for the tires and thermal aprons and the HTM (HAMM Temperature Meter).
ROPS cab or operator's platform
For the different climatic zones, HAMM offers the pneumatic-tire roller with open operator's platform, including ROPS, with protective roof or with ROPS cab. In each case, many storage options are available. Depending on the configuration, cup holders, heating and air-conditioning system, as well as a 12 V power socket, are standard equipment or available as an option.
The seat height and the degree of hardness of the suspension – as well as the seat tilt – can be adjusted as standard. The tilt and height of the armrests can also be adjusted at any time. Options such as a comfort exit with tiltable steering column, a backrest extension, seat belt monitoring device, an additional driving lever and comfort armrests on the left and right, as well as a radio, round off the range. Operation is simple and easy to understand even without language skills.